Category:Marine Sediment Working Group

From Linked Earth Wiki
Revision as of 23:48, 7 March 2017 by Khider (Talk | contribs) (Add size fraction)

Jump to: navigation, search
( Pages with a poll, Working Group )
A marine sediment core
Credit: Hannes Grobe (Own work) CC BY 3.0, via Wikimedia Commons

Overview

In the Linked Earth context, a working group (WG) is a self-organized coalition of knowledgeable experts, whose activities are governed herewith. This page is dedicated to the discussion of data and metadata standards for marine sedimentary archives (see this page for a definition of Marine Sediment Archive), and aims to formulate a set of recommendations for such a standard.

Members

The group currently has one coordinator, Julie Richey (USGS)

Specific tasks

We recommend that discussions focus on the following considerations, and explore potential commonalities.

For each observation type, we recommend:

  • structuring discussions around what scientific questions one would want to ask of the data
  • listing essential, recommended, and optional information for:
    • the measurements themselves
    • any inference made from the measurements (e.g. calibration to temperature)
    • the underlying uncertainties, and what those numbers correspond to (e.g. 1-sigma or 2-sigma?)
  • providing an ideal data table, so the community knows what to report and how to report it.
  • providing separate recommendations for new and legacy datasets, and for how to label measured and inferred variable (e.g. Mg/Ca is measured, temperature is inferred)
  • thinking about how the rest of the paleoscience community, or other (non)scientists may make use of the data you describe.

Marine sediments are a very ubiquitous archive on which many types of observations are made, and involving thousands of people around the world. It seems wise for this WG to rally around sub-groups start dedicated to data standards about the following sensors/observation types.

Previous standardization efforts

A discussion regarding paleoclimate data standards was started during the PMIP Ocean Workshop: Understanding changes since the Last Glacial Maximum (hereafter, PMIP_LGM) in Corvallis, OR in December 2013. Given the expertise of the working group members, the discussion focus on sedimentary archives. Meeting notes can be found here and summarized in the sections below.

The recommendations made at the workshop concerned new datasets only. It was recognized that different sets of standards would be necessary for legacy datasets.

Types of Data

There are three principle types of data that are relevant for the paleoceanography/paleoclimatology community:

  • Original data values – this would include raw values of all variables measured or otherwise determined on the substrate of interest, recorded against an unambiguous sample identifier (for instance, depth in the archive). This includes age control points (ACP) used to derive the age model of the paleo-time series, including radioisotopes (14C, excess 210Pb), and benthic stack comparison. All data that are reported for the first time in a scientific publication should be treated as original. The procedure of obtaining original data should be documented such as to allow full replication of the results. In the LinkedEarth Ontology, the original data values are referred as Category:MeasuredVariable_©.
Should the "unique sample identifier" identified at the PMIP_LGM workshop be:
You are not entitled to vote.
You are not entitled to view results of this poll.
There were 7 votes since the poll was created on 23:13, 7 March 2017.
poll-id 36C56A4F3693990E0936AB6AC7F8F158

At the PMIP_LGM workshop, it was proposed that the unique sample identifier consists of the name, geographical coordinates, water depth of the sediment core in addition to the position of the analyses sediment segment in the core. Is this labelling:
You are not entitled to vote.
You are not entitled to view results of this poll.
There were 7 votes since the poll was created on 23:27, 7 March 2017.
poll-id 14714BE25ABC4C1A7B14ED87FE6B20B1

Depth can be problematic as a unique identifier since there are several to calculate or report depth in a sample (i.e., top-depth, mid-depth, depth interval.) and IODP uses several depth scales.

In the case where depth is reported for sediment cores, should we report:
You are not entitled to vote.
You are not entitled to view results of this poll.
There were 6 votes since the poll was created on 23:16, 7 March 2017.
poll-id 27DAE87F3370E83700CE16B6457F9284

Deborah Khider (talk) 15:29, 7 March 2017 (PST): I probably forgot ways of expressing depth, please add comments below.

  • Derived data values – this category refers to values of variables derived from other variables, derived or raw, original or compiled, reported against an unambiguous sample identifier and accompanied with a documentation of the derivation procedure such as to allow full replication of the result. This category includes algorithms of any kind relating depth to age that have been used to assign ages to values of raw or derived variables. In the LinkedEarth Ontology, derived data values are referred to as Category:InferredVariable_©.

The derivation procedure is contained in the Category: CalibrationModel_©.

For marine sediment cores, should the be:
You are not entitled to vote.
You are not entitled to view results of this poll.
There were 0 votes since the poll was created on 23:21, 7 March 2017.
poll-id E5A5D8EDF36C794DDCBE9259341CBB2A

Should the used in the calibration of marine sedimentary records be:
You are not entitled to vote.
You are not entitled to view results of this poll.
There were 0 votes since the poll was created on 23:23, 7 March 2017.
poll-id 36EF6A943F39866E544D5EBDED19422A

  • Compilation of data values – this refers to raw values of all variables from published sources, gathered for the purpose of quantitative treatment, recorded against an unambiguous sample identifier and labelled with an unambiguous reference to the publication where such data were originally presented. Reporting of data compilations is required wherever these are used to derive patterns or variables from the data other than those reported in the original publication.
Should compilation of previous work involving marine sediment records report:
You are not entitled to vote.
You are not entitled to view results of this poll.
There were 0 votes since the poll was created on 23:29, 7 March 2017.
poll-id 71887D395B1332B67CE7B478C21C4850

Geochemical Data

Foraminiferal Geochemistry

Stable isotopes

In the following table, enter the metadata that you'd wish every member of the stable isotope community would enter to make their data reproducible. To add more lines, follow this guide. For a definition of Essential (E)/ Recommended (R)/ Desired (D), see this page.

Table 1: Essential/Recommended/Desired Metadata for foraminiferal stable isotopes
Metadata Essential (E)/ Recommended (R) / Desired (D) Reason Added by (optional)
Category: Location_© (Lat, Lon) E Location is a must Kau (talk) 13:34, 7 March 2017 (PST)
Property:Wgs84:Alt © (Depth) R Especially for deep-sea drilling sediments, water depths can be important to assess various biogeochemical properties and parameters of stable isotopic parameters Kau (talk) 13:34, 7 March 2017 (PST)
Property:SensorGenus_© Property:SensorSpecies_© E Species information needed to infer which section of the water column is being recorded Kau (talk) 13:34, 7 March 2017 (PST)
Cleaning Methodology R Useful to correct for offsets, especially for compilation work although a quick plot can often help figure out the cleaning methodology Kau (talk) 13:34, 7 March 2017 (PST)
Sample Depth E Positional information needed to relate the samples back to the archive Kau (talk) 13:34, 7 March 2017 (PST)
ChonDataTable E for new datasets/ R for legacy datasets The raw radiocarbon, tie points, 210Pb measurements should be made available so that age models can be updated in light of new calibration curves or new age modeling techniques Kau (talk) 13:34, 7 March 2017 (PST)
Number of specimens utilized per sample R The number of foraminiferal tests used per sample can be used to understand the sampling uncertainity associated with the measurements based on the signal-to-noise ratio of the climate signal at the location (planktic foraminifera live for 2-4 weeks) Kau (talk) 13:34, 7 March 2017 (PST)
Property:Standard © E The standard against which the measurements are reported (especially for d18O). VBDP vs VSMOW Deborah Khider (talk) 13:41, 7 March 2017 (PST)
Analytical Precision R The machine precision based on reproducability of standards Kau (talk) 13:49, 7 March 2017 (PST)
Size Fraction R Stable isotopes ratios have been shown to vary by size fraction in several studies Deborah Khider (talk) 15:48, 7 March 2017 (PST)

To gather rapid feedback on whether the proposed metadata should be essential, recommended or optional, answer the polls below:

For stable isotopes in foraminifera, should the location information (and water depth) be:
You are not entitled to vote.
You are not entitled to view results of this poll.
There were 6 votes since the poll was created on 21:45, 7 March 2017.
poll-id 45FF02339429C6C462C391EC3CEE963C

For stable isotopes in foraminifera, should the sensor genus/species information be:
You are not entitled to vote.
You are not entitled to view results of this poll.
There were 5 votes since the poll was created on 21:45, 7 March 2017.
poll-id F4DAE98FBB4889111B360750A225B6C6


For stable isotopes in foraminifera, should the depth (position of the measurement in the archive) information be:
You are not entitled to vote.
You are not entitled to view results of this poll.
There were 6 votes since the poll was created on 21:45, 7 March 2017.
poll-id 9C0329A43D83FE74AB4BBFAF34E3676B

For stable isotopes in foraminifera, should the ChonMeasurementTable information be:
You are not entitled to vote.
You are not entitled to view results of this poll.
There were 4 votes since the poll was created on 21:45, 7 March 2017.
poll-id 9E1154CAC198A5C2E9756598EC5FB134

For stable isotopes in foraminifera, should the numbers of specimens utilized be:
You are not entitled to vote.
You are not entitled to view results of this poll.
There were 4 votes since the poll was created on 21:45, 7 March 2017.
poll-id E46F4CC0B5B309E1DD2E2019C99AD8E2

For stable isotopes in foraminifera, should the property standard reported be:
You are not entitled to vote.
You are not entitled to view results of this poll.
There were 4 votes since the poll was created on 21:52, 7 March 2017.
poll-id 2F10B4A70435835B8464A443435D56CF

For stable isotopes in foraminifera, should the analytical precision reported be:
You are not entitled to vote.
You are not entitled to view results of this poll.
There were 4 votes since the poll was created on 21:52, 7 March 2017.
poll-id E198E4FAF1A9E8358CE0BBA841C3BA4F

For stable isotopes in foraminifera, should size fraction be:
You are not entitled to vote.
You are not entitled to view results of this poll.
There were 4 votes since the poll was created on 23:48, 7 March 2017.
poll-id 8ED5D3D55F5D5E0D577F05470CA3D485

Trace Metals

Mg/Ca

In the following table, enter the metadata that you'd wish every member of the Mg/Ca community would enter to make their data reproducible. To add more lines, follow this guide. For a definition of Essential (E)/ Recommended (R)/ Desired (D), see this page.

Table 1: Essential/Recommended/Desired Metadata for foraminiferal Mg/Ca
Metadata Essential (E)/ Recommended (R) / Desired (D) Reason Added by (optional)
Category: Location_© (Lat, Lon) E Location is a must Deborah Khider (talk) 12:37, 17 February 2017 (PST)
Property:Wgs84:Alt © (Depth) E Water depth can be useful to get an idea of dissolution in the core. Especially for deep-sea drilling sediments, water depths can be important to assess various biogeochemical properties and parameters of stable isotopic parameters Kau (talk) 13:39, 7 March 2017 (PST)
Property:SensorGenus_© Property:SensorSpecies_© E Species information needed to infer which section of the water column is being recorded Deborah Khider (talk) 12:37, 17 February 2017 (PST)
Cleaning Methodology R Useful to correct for offsets, especially for compilation work although a quick plot can often help figure out the cleaning methodology Deborah Khider (talk) 12:37, 17 February 2017 (PST)
Sample Depth E Positional information needed to relate the samples back to the archive Deborah Khider (talk) 12:37, 17 February 2017 (PST)
ChonDataTable E for new datasets/ R for legacy datasets The raw radiocarbon, tie points, 210Pb measurements should be made available so that age models can be updated in light of new calibration curves or new age modeling techniques Deborah Khider (talk) 12:37, 17 February 2017 (PST)
Number of specimens utilized per sample R The number of foraminiferal tests used per sample can be used to understand the sampling uncertainity associated with the measurements based on the signal-to-noise ratio of the climate signal at the location (planktic foraminifera live for 2-4 weeks) Kau (talk) 13:17, 7 March 2017 (PST)
Analytical Precision D Uncertainty in the measurements Deborah Khider (talk) 13:51, 7 March 2017 (PST)

To gather rapid feedback on whether the proposed metadata should be essential, recommended or optional, answer the polls below:

For Mg/Ca in foraminifera, should the location information (especially in relation to water depth) be:
You are not entitled to vote.
You are not entitled to view results of this poll.
There were 5 votes since the poll was created on 21:26, 7 March 2017.
poll-id 30B1E1BEA2083F7429E59527F2DBF8A8

For Mg/Ca in foraminifera, should the sensor genus/species information be:
You are not entitled to vote.
You are not entitled to view results of this poll.
There were 5 votes since the poll was created on 21:26, 7 March 2017.
poll-id 036FE79A6C27842348B489B982D516D8

Should the cleaning methodology be considered:
You are not entitled to vote.
You are not entitled to view results of this poll.
There were 7 votes since the poll was created on 20:07, 7 November 2016.
poll-id 5D88039254CA2FE4746A7A2515CDDBCA

For Mg/Ca in foraminifera, should the depth (position of the measurement in the archive) information be:
You are not entitled to vote.
You are not entitled to view results of this poll.
There were 5 votes since the poll was created on 21:26, 7 March 2017.
poll-id 5E204D0FB2EBB8A0B8A78A229261EC4E

For Mg/Ca in foraminifera, should the ChonMeasurementTable information be:
You are not entitled to vote.
You are not entitled to view results of this poll.
There were 5 votes since the poll was created on 21:26, 7 March 2017.
poll-id 40ECF6DB8C722909F39479BD19C3F2CD

For Mg/Ca in foraminifera, should the numbers of specimens utilized be:
You are not entitled to vote.
You are not entitled to view results of this poll.
There were 4 votes since the poll was created on 21:46, 7 March 2017.
poll-id 9D1700879FA581737C1F779C8C0BAB9E

For stable isotopes in foraminifera, should the analytical precision reported be:
You are not entitled to vote.
You are not entitled to view results of this poll.
There were 4 votes since the poll was created on 21:52, 7 March 2017.
poll-id E198E4FAF1A9E8358CE0BBA841C3BA4F

Organic Geochemistry

Alkenones

GDGTs

Should raw peak areas (as opposed to just TEX86 index) be:
You are not entitled to vote.
You are not entitled to view results of this poll.
There were 4 votes since the poll was created on 19:20, 21 November 2016.
poll-id 661DF66A537B28E6EBFFACB0E845D584

Compound specific isotopes

Physical Data

Grain Size

Micropaleontological Data

  • Report raw counts if available. And if not, at least
  • Minimum number of specimens counted
  • Size fraction

If the data were used to infer temperature or sea ice concentration, then the method (MAT, WA-PLS, etc) and the training set should be mentioned/required metadata.

Pages in category "Marine Sediment Working Group"

This category contains only the following page.

O