PollingStats

From Linked Earth Wiki
Jump to: navigation, search
( Pages with a poll )

2017-06-21 17:19:48

Should any 'additional' proxy data measured along the primary data of interest be archived with the dataset?
1. Yes
2. If identified as not part of peer-reviewed study
3. No

User selections:
- JianghuiDu = 3
- Khider = 1

2017-05-24 13:49:20

How should we handle Sources used for Historical Documents?
1. Use existing Publication structure for one historical source instead of linking to current publication
2. Add different table with same structure as Publication to handle several sources in one LiPD file
3. Something else (Comment in discussion tab)

User selections:
- KMicha = 2

2017-05-24 13:47:35

How should we handle Sources used for Historical Documents?
1. Use existing Publication structure for one historical source instead linking to current publication
2. Add different table with same structure as Publication to handle several sources in one file
3. Something else (Comment in discussion tab)

User selections:
- KMicha = 2

2017-05-24 13:44:49

How should we handle Sources used for Historical Documents?
1. Use existing Publication structure for one historical source instead linking to current publication
2. Add different table with same structure as Publication to handle several sources in one file
3. Something else (Comment below)

User selections:
- KMicha = 2

2017-05-09 17:32:14

For compound specific isotopes in lake sediments, should the interpretation (e.g., temperature, salinity, precipitation) be: 
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Santi = 3

2017-05-09 17:31:39

For compound specific isotopes in lake sediments, should the source of the compound (terrestrial vs aquatic) be: 
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Santi = 1

2017-05-09 17:31:05

For compound specific isotopes in lake sediments, should the compound analyzed be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Santi = 1

2017-05-09 09:07:18

For speleothem archives, regarding the site (cave) where the sample(s) was (were) obtained, should the name be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Geofrapp = 1
- Jeg = 1
- Khider = 3

2017-04-25 20:07:11

For alkenones measurements in marine sediments, should the "raw" peak areas be:
1. Essential metadata
2. Recommended metadata
3. Desired metadata

User selections:
- Khider = 3

2017-04-25 19:30:40

For datasets based on ice core archives, should the interpretation of the proxies be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Jeg = 2

2017-04-25 19:26:26

For datasets based on ice core archives, should the age scale and dating points be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Jeg = 2

2017-04-25 00:07:30

For speleothem archives, should the in-cave drip chemistry be:
1. Essential
2. Recommended
3. Desired

User selections:
- NickScroxton = 3

2017-04-25 00:07:22

For speleothem archives, should the in-cave drip-rate be:
1. Essential
2. Recommended
3. Desired

User selections:
- NickScroxton = 2

2017-04-25 00:07:13

For speleothem archives, should the in-cave pCO2 be:
1. Essential
2. Recommended
3. Desired

User selections:
- NickScroxton = 3

2017-04-25 00:07:05

For speleothem archives, should the in-cave humidity be:
1. Essential
2. Recommended
3. Desired

User selections:
- NickScroxton = 1

2017-04-25 00:06:51

For speleothem archives, should the in-cave temperature be:
1. Essential
2. Recommended
3. Desired

User selections:
- NickScroxton = 1

2017-04-24 23:38:50

For speleothem archives, should the karst flow route type be:
1. Essential
2. Recommended
3. Desired

User selections:
- NickScroxton = 2

2017-04-24 23:38:39

For speleothem archives, should the karst rock overburden thickness be:
1. Essential
2. Recommended
3. Desired

User selections:
- NickScroxton = 2

2017-04-24 23:38:12

For speleothem archives, should the karst porosity be:
1. Essential
2. Recommended
3. Desired

User selections:
- NickScroxton = 3

2017-04-24 23:38:03

For speleothem archives, should the karst transit time distributions be:
1. Essential
2. Recommended
3. Desired

User selections:
- NickScroxton = 3

2017-04-24 23:37:42

For speleothem archives, should the karst residence time be:
1. Essential
2. Recommended
3. Desired

User selections:
- NickScroxton = 3

2017-04-24 22:55:26

For datasets based on the speleothem , should metadata about the vegetation above the cave be:
1. Essential
2. Recommended
3. Desired

User selections:
- NickScroxton = 1

2017-04-24 22:54:49

For datasets based on the speleothem , should metadata about the soild sickness above the cave be:
1. Essential
2. Recommended
3. Desired

User selections:
- NickScroxton = 2

2017-04-24 22:54:23

For datasets based on the speleothem , should metadata about modern cave conditions be:
1. Essential
2. Recommended
3. Desired

User selections:
- NickScroxton = 1

2017-04-24 22:00:18

For speleothem archive, should the correction made for aragonite be:
1. Essential
2. Recommended
3. Desired

User selections:
- Geofrapp = 1
- Khider = 2
- NickScroxton = 2

2017-04-24 22:00:02

For speleothem archive, should the standard (PDB,VPDB) be:
1. Essential
2. Recommended
3. Desired

User selections:
- Geofrapp = 1
- Khider = 1
- NickScroxton = 1

2017-04-24 21:59:54

For speleothem archive, should the precision on the measurements be:
1. Essential
2. Recommended
3. Desired

User selections:
- Geofrapp = 1
- Khider = 2
- NickScroxton = 2

2017-04-24 21:59:20

For speleothem archive, should the evidence for equilibirum (Hendy tests) be:
1. Essential
2. Recommended
3. Desired

User selections:
- Khider = 3
- NickScroxton = 2

2017-04-24 21:58:06

For speleothem archive, should the thickness of the analyzed sample be:
1. Essential
2. Recommended
3. Desired

User selections:
- Geofrapp = 1
- Khider = 2
- NickScroxton = 1

2017-04-24 21:52:55

For speleothem archive, should the distance from top of speleothem be:
1. Essential
2. Recommended
3. Desired

User selections:
- Geofrapp = 1
- Khider = 1
- NickScroxton = 1

2017-04-24 21:37:23

For speleothem archives, should the rock age of the cave be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Geofrapp = 1
- Khider = 2
- NickScroxton = 2

2017-04-24 21:37:19

For spelothem archives, should the geology of the cave be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Geofrapp = 1
- Khider = 2
- NickScroxton = 1

2017-04-24 21:36:19

For speleothem archives, regarding the site (cave) where the sample(s) was (were) obtained, should the name be:
1. Essential Metadata
2. Recommended Metadata
3. Essential Metadata

User selections:
- NickScroxton = 1

2017-04-20 20:31:19

For speleothem archive, should the drip type (seepage, seasonal, mixture, unknown) be:
1. Essential
2. Recommended
3. Desired

User selections:
- Geofrapp = 1
- Khider = 2
- NickScroxton = 2

2017-04-20 20:30:50

Should the speleothem type (e.g, candlestick stalagmite, stalagmite boss, flowstone) be:
1. Essential
2. Recommended
3. Desired

User selections:
- Geofrapp = 1
- Khider = 2
- NickScroxton = 1

2017-04-20 20:30:13

For speleothem archives, the thickness of overlying bedrock above the speleothem (in m) should be:
1. Essential
2. Recommended
3. Desired

User selections:
- Geofrapp = 1
- Khider = 2
- NickScroxton = 2

2017-04-20 20:29:45

For speleothem archives, should the distance from the cave entrance be:
1. Essential
2. Recommended
3. Desired

User selections:
- Geofrapp = 1
- Khider = 2
- NickScroxton = 1

2017-04-20 20:29:45

For speleothem archives, should the name of the physical sample be:
1. Essential
2. Recommended
3. Desired

User selections:
- Geofrapp = 1
- Khider = 1
- NickScroxton = 1

2017-04-04 14:35:06

For marine sediments and legacy datasets based on TEX86, should the depth information in the archive be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Khider = 2

2017-04-04 14:34:56

For marine sediments and new datasets based on TEX86, should the depth information in the archive be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Khider = 1

2017-04-04 14:34:01

For marine sediments and new datasets, should the TEX86 index be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Khider = 1

2017-04-04 14:34:01

For marine sediments and legacy datasets, should the TEX86 index be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Khider = 2

2017-03-31 23:26:28

For MARPA archives, should the ClimateInterpretation be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Edassie = 1
- Jrichey = 3
- Kdelong = 2
- Khider = 2
- Tfelis = 1

2017-03-31 23:13:29

Should the method (if new) used to generate data from MARPA archives be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Edassie = 1
- Jrichey = 1
- Kdelong = 1
- Khider = 1
- Tfelis = 2

2017-03-31 23:13:20

Should the method (if standard) used to generate data from MARPA archives be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Edassie = 2
- Jrichey = 1
- Kdelong = 1
- Khider = 3
- Tfelis = 3

2017-03-31 23:11:46

Should the location of the instrument used to generate data from MARPA archives be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Edassie = 2
- Jrichey = 3
- Kdelong = 2
- Khider = 3
- Tfelis = 2

2017-03-31 23:11:33

Should the type of instrument used to generate data from MARPA archives be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Edassie = 3
- Jrichey = 2
- Kdelong = 2
- Khider = 2
- Tfelis = 1

2017-03-31 23:11:11

Should information  about the instrument used to generate data from MARPA archives be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Edassie = 2
- Jrichey = 3
- Kdelong = 2
- Khider = 2
- Tfelis = 1

2017-03-31 22:34:26

For MARPA archives, should the position where the measurements was taken on the archive (i.e. depth) be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Edassie = 1
- Jrichey = 2
- Kdelong = 1
- Khider = 2
- Tfelis = 2

2017-03-31 22:34:26

For MARPA archives, should the raw measurements (e.g., d18O, Sr/Ca,...) be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Edassie = 2
- Jrichey = 1
- Kdelong = 2
- Khider = 1
- Tfelis = 2

2017-03-31 22:34:26

For MARPA archives, should the interpolated chronology be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Edassie = 1
- Jrichey = 1
- Kdelong = 2
- Khider = 3
- Tfelis = 1

2017-03-29 19:39:17

For U-series measurements in coral archive, should the uncertainty be reported as
1. ±2σ
2. ±1σ
3. something else (comment below).

User selections:
- JianghuiDu = 1
- KMicha = 2
- Khider = 1
- Tfelis = 1

2017-03-29 18:47:17

For new datasets, when reporting bulk sediment measurements, should the environmental parameter be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 1
- Khider = 2

2017-03-29 18:47:01

For new datasets, when reporting bulk sediment measurements, should the method reference be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 1
- Khider = 3

2017-03-29 18:46:48

For new datasets, when reporting bulk sediment measurements, should the units of measurement be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 1
- Khider = 1

2017-03-29 18:46:37

For new datasets, when reporting bulk sediment measurements, should the measurement parameter be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Khider = 1

2017-03-29 18:46:23

For new datasets, when reporting bulk sediment measurements, should the analytical method be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 1
- Khider = 3

2017-03-29 18:45:58

For new datasets, when reporting bulk sediment measurements, should the sample pretreatment be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 1
- Khider = 3

2017-03-29 15:24:32

Should compilation of previous work involving marine sediment records report:
1. the original publication in which the series appear
2. a unique identifier to the time series
3. both

User selections:
- JianghuiDu = 1
- Khider = 3
- Lisiecki = 3
- Williamrgray = 3

2017-03-23 04:40:34

For 210Pb chronologies, should depth be considered:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Cjcm500 = 1
- Pfrancus = 1

2017-03-23 04:40:34

For 210Pb chronologies, should the reporting of a salt correction be considered:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Cjcm500 = 1
- Pfrancus = 2

2017-03-23 04:40:34

For 210Pb chronologies, should the method used to convert to calendar age be considered:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Pfrancus = 1

2017-03-23 04:40:34

For 210Pb chronologies, should the archive porosity be considered:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Cjcm500 = 2
- Pfrancus = 1

2017-03-23 04:40:34

For 210Pb chronologies, should the measurement methodology be considered:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Cjcm500 = 1
- Pfrancus = 2

2017-03-23 04:40:34

For 210Pb chronologies, should the activities be reported in:
1. Bq/kg
2. other
3. No imposed units but units should be reported

User selections:
- Cjcm500 = 1
- Pfrancus = 1

2017-03-23 04:40:34

For 210Pb chronologies, should the archive collectionDate be considered:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Cjcm500 = 1
- Pfrancus = 1

2017-03-23 04:32:13

Should the measured total 210Pb be considered:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Cjcm500 = 1
- Khider = 3
- Pfrancus = 1

2017-03-23 04:31:47

Should the supported activities (226Ra) be considered:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Cjcm500 = 1
- Khider = 3
- Pfrancus = 3

2017-03-23 04:31:01

Should the calculated excess 210Pb values be considered:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Cjcm500 = 1
- Khider = 1
- Pfrancus = 1

2017-03-20 20:57:43

For U-series uncertainty in coral archive, should the uncertainty in the U-series decay constant for legacy datasets be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Khider = 3
- Tfelis = 3

2017-03-20 20:57:43

For U-series uncertainty in coral archive, should the uncertainty in the U-series decay constant for new datasets be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Khider = 3
- Tfelis = 2

2017-03-17 18:21:39

Should the cleaning methodology reference (i.e. the specific protocol) for for foraminifera trace elements be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 1
- Jrichey = 3
- Khider = 3
- Williamrgray = 2

2017-03-17 18:21:18

For legacy datasets, should the cleaning methodology for for foraminifera trace elements (oxidative vs reductive) be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 1
- Jrichey = 3
- Khider = 1
- Williamrgray = 1

2017-03-17 18:20:38

For new datasets, should the cleaning methodology for for foraminifera trace elements (oxidative vs reductive) be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 1
- Jrichey = 2
- Khider = 1
- Williamrgray = 1

2017-03-17 18:00:42

For marine sediment studies, should the instrument used for standard analytical techniques be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 1
- Jrichey = 3
- Khider = 3
- Williamrgray = 2

2017-03-17 18:00:42

For marine sediments, the gear type used for the collection of the archive should be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 1
- Jrichey = 3
- Khider = 3
- Williamrgray = 3

2017-03-17 18:00:42

For studies based on marine sediments, should the volume of sediment analyzed be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 3
- Jrichey = 3
- Khider = 3
- Williamrgray = 3

2017-03-17 18:00:42

For marine sediment studies, should the instrument used in new protocols be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 1
- Jrichey = 3
- Khider = 1
- Williamrgray = 1

2017-03-17 17:05:28

For Mg/Ca in foraminifera, should contamination indicators (Al/Ca, Mn/Ca, Fe/Ca) be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 1
- Jrichey = 2
- Khider = 3
- Williamrgray = 2

2017-03-15 23:38:55

For radiocarbon measurements, the hard/soft water effect: value, ± one-sigma sd (or square root of var) uncertainty, reference/source should be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Cjcm500 = 1

2017-03-15 23:38:14

For radiocarbon measurements converted to calendar ages, the  DELTA_R value, ± one-sigma sd (or square root of the variance) uncertainty, reference/source should be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Cjcm500 = 1
- JianghuiDu = 1
- Lisiecki = 2
- Tfelis = 1

2017-03-15 23:22:03

For radiocarbon measurements converted to calendar ages, the marine reservoir age, one-sigma sd (or square root of the variance) uncertainty, reference/source should be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Cjcm500 = 1
- JianghuiDu = 1
- Khider = 2
- Lisiecki = 1
- Tfelis = 1

2017-03-15 23:21:03

For radiocarbon measurements, the F14C should be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Cjcm500 = 1
- JianghuiDu = 2
- Khider = 2

2017-03-15 23:20:09

For radiocarbon measurements, the 1-sigma standard deviation on the conventional radiocarbon age should be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Cjcm500 = 1
- JianghuiDu = 1
- Khider = 1
- Tfelis = 1

2017-03-15 23:19:14

For radiocarbon measurements, conventional radiocarbon age as years BP should be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Cjcm500 = 1
- JianghuiDu = 1
- Khider = 1
- Tfelis = 1

2017-03-15 23:18:23

For radiocarbon measurements, the d13C ratio actual/estimated should be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Cjcm500 = 3
- JianghuiDu = 2
- Khider = 3
- Tfelis = 3

2017-03-15 23:17:28

For radiocarbon measurements, the laboratory ID# should be:
1. Essential metadata
2. Recommended metadata
3. Desired metadata

User selections:
- Cjcm500 = 1
- JianghuiDu = 3
- Khider = 3
- Pfrancus = 1
- Tfelis = 1

2017-03-15 23:17:17

For radiocarbon measurements, the method should be:
1. Essential metadata
2. Recommended metadata
3. Desired metadata

User selections:
- Cjcm500 = 1
- JianghuiDu = 1
- Khider = 2
- Tfelis = 3

2017-03-15 23:17:17

For Radiocarbon measurements, the chemical pretreatment/preparation of the sample should be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Cjcm500 = 1
- JianghuiDu = 1
- Khider = 2
- Pfrancus = 1
- Tfelis = 3

2017-03-15 22:23:03

For radiocarbon measurements, the type/matrix should be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 1
- Khider = 3
- Lisiecki = 1
- Tfelis = 1

2017-03-15 22:21:07

For radiocarbon measurements, should the sample ID be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 3
- Khider = 2
- Pfrancus = 1
- Tfelis = 1

2017-03-15 18:03:24

How should we report year?
1. Using AD (anno Domini)
2. Using CE (Common Era)

User selections:
- Cjcm500 = 2
- JianghuiDu = 2
- KMicha = 2
- Khider = 1
- Pfrancus = 2
- Tfelis = 2

2017-03-15 18:02:33

How should we report age?
1. Using BP, the present being defined as 1950
2. Using BP, the present being defined as the latest year in a record
3. Using BP, the present being defined as 2000
4. Something else (Comment below)

User selections:
- Cjcm500 = 1
- JianghuiDu = 4
- Khider = 1
- Lisiecki = 1
- Pfrancus = 1
- Tfelis = 1

2017-03-15 17:59:29

Should we keep these two separate concepts?
1. Yes
2. No

User selections:
- Cjcm500 = 1
- JianghuiDu = 1
- Khider = 1
- Pfrancus = 1
- Tfelis = 1

2017-03-14 23:42:11

If documented with the data and using a technique creating ensembles of possible age models, should the ensemble statistics (e.g., mean, median, standard deviation, quantiles) be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Khider = 2
- Lisiecki = 2

2017-03-14 23:41:30

If documented with the data and using a technique creating ensembles of possible age models, should the ensemble age models be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Khider = 2
- Lisiecki = 2

2017-03-14 23:39:26

If documented with the data, should the code (i.e. parameters used) used for the chronology be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 3
- Khider = 2
- Lisiecki = 2

2017-03-14 23:38:52

If documented with the data, should the publication information about the software used in the chronology be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 1
- Khider = 1
- Lisiecki = 1
- Tfelis = 1

2017-03-14 23:38:52

Should the method by which the chronology is obtained be fully documented
1. with the data
2. in the paper only
3. both with the data and in the paper

User selections:
- JianghuiDu = 1
- Khider = 3
- Tfelis = 3

2017-03-14 23:35:16

Should legacy chronologies be updated to the current field standard (e.g. chronologies obtained from IntCal09 should be redone with IntCal13)?
1. Yes, if raw data is available
2. No, but put a warning on the chronologies
3. No

User selections:
- Jeg = 1
- Khider = 2
- Lisiecki = 2
- Tfelis = 2

2017-03-14 17:16:10

For coral archives, should the x-ray pictures be included with the data?
1. Essential
2. Recommended
3. Desired

User selections:
- Edassie = 3
- Jrichey = 2
- Kdelong = 1
- Khider = 3
- Tfelis = 2

2017-03-14 03:26:13

What should we do with legacy chronologies? (this is a dummy poll; please update)
1. Contact original authors to obtain their uncalibrated dates
2. Curse authors who were too short-sighted to archive uncalibrated dates
3. Ignore them altogether

User selections:
- Jeg = 1

2017-03-08 19:44:08

Should the calibration Publication information be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Belenms = 1
- Jeg = 1
- JianghuiDu = 1
- Jrichey = 2
- Khider = 3
- Williamrgray = 1

2017-03-08 19:39:20

For Mg/Ca in foraminifera, should the method of sediment disintegration be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 3
- Jrichey = 3
- Khider = 3
- Williamrgray = 3

2017-03-08 19:39:17

For Mg/Ca in foraminifera, should the applied correction/equilibrium offset be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 1
- Jrichey = 3
- Khider = 2

2017-03-08 19:39:17

For Mg/Ca in foraminifera, should the seasonality be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 3
- Jrichey = 3
- Khider = 2
- Williamrgray = 2

2017-03-08 19:39:06

For Mg/Ca in foraminifera, should the habitat depth be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 3
- Jrichey = 3
- Khider = 2
- Williamrgray = 2

2017-03-08 19:38:45

For stable isotopes in foraminifera, should the habitat depth be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 2
- Jrichey = 3
- Khider = 2
- Lisiecki = 3
- Williamrgray = 2

2017-03-08 19:38:37

For stable isotopes in foraminifera, should the seasonality be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 3
- Jrichey = 3
- Khider = 2
- Lisiecki = 3
- Williamrgray = 3

2017-03-08 19:38:19

For stable isotopes in foraminifera, should the applied correction/equilibrium offset be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 1
- Jrichey = 3
- Khider = 2
- Williamrgray = 1

2017-03-08 19:37:50

For stable isotopes in foraminifera, should the method of sediment disintegration be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 2
- Jrichey = 3
- Khider = 3
- Williamrgray = 3

2017-03-08 19:27:33

For Micropaleontological Data, should the habitat depth be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Jrichey = 3
- Khider = 1
- SFeakins = 3

2017-03-08 19:27:22

For Micropaleontological Data, should the seasonality be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Jrichey = 3
- Khider = 2
- SFeakins = 3

2017-03-08 19:24:25

For the uncertainty based on reproducibility, should the number of repeat measurements used to determined the reproducibility be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Khider = 2
- Santi = 3
- Tfelis = 2

2017-03-08 00:31:36

Should compilation of previous work involving marine sediment records report:
1. the original publication in which the series appear
2. a unique identifier to the time series

User selections:
- Belenms = 1
- Jeg = 2
- JianghuiDu = 1
- Jrichey = 1
- Khider = 2
- Lisiecki = 1
- Williamrgray = 1

2017-03-08 00:30:41

Should the code used in the calibration of marine sedimentary records be:
1. Essential
2. Recommended
3. Desired

User selections:
- Belenms = 1
- Jeg = 2
- JianghuiDu = 1
- Jrichey = 2
- Khider = 3
- Lisiecki = 2
- Williamrgray = 2

2017-03-08 00:30:20

For marine sediment cores, should the calibration model be:
1. Essential
2. Recommended
3. Desired

User selections:
- Jeg = 1
- JianghuiDu = 1
- Jrichey = 2
- Khider = 3
- Lisiecki = 2
- Williamrgray = 1

2017-03-08 00:25:08

For foraminiferal geochemistry work, should information about the taxonomy being followed on top of the genus/species information be:
1. Essential
2. Recommended
3. Desired

User selections:
- Belenms = 1
- Jrichey = 3
- Khider = 1
- Williamrgray = 1

2017-03-07 23:54:07

For Micropaleontological Data, should size fraction be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Jrichey = 1
- Khider = 1
- SFeakins = 2

2017-03-07 23:53:57

For Micropaleontological Data , should the number of specimens counted be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Jrichey = 1
- Khider = 2
- SFeakins = 2

2017-03-07 23:53:10

For Micropaleontological Data , should raw counts be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Jrichey = 2
- Khider = 2
- SFeakins = 2

2017-03-07 23:49:54

For Mg/Ca in foraminifera, should the size fraction be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 2
- Jrichey = 2
- Khider = 2
- Williamrgray = 1

2017-03-07 23:49:46

For Mg/Ca in foraminifera, should the analytical precision reported be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 1
- Jrichey = 1
- Khider = 3
- Williamrgray = 2

2017-03-07 23:48:20

For stable isotopes in foraminifera, should size fraction be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 1
- Jrichey = 2
- Khider = 2
- Williamrgray = 1

2017-03-07 23:27:24

At the PMIP_LGM workshop, it was proposed that the unique sample identifier consists of the name, geographical coordinates, water depth of the sediment core in addition to the position of the analyses sediment segment in the core. Is this labelling:
1. Appropriate
2. Too specific
3. Should be replaced by a random sequence

User selections:
- Belenms = 1
- Jeg = 3
- JianghuiDu = 2
- Jrichey = 1
- Khider = 2
- Petebrew = 3

2017-03-07 23:16:46

In the case where depth is reported for sediment cores, should we report:
1. top depth
2. mid-depth
3. depth interval (i.e., top + bottom depth)
4. interval thickness
5. all of the above

User selections:
- Belenms = 5
- JianghuiDu = 5
- Jrichey = 5
- Khider = 3
- Yzhou = 3

2017-03-07 23:13:12

Should the "unique sample identifier" identified at the PMIP_LGM workshop be:
1. depth in the sedimentary archive
2. a unique sample code, depth being one of the parameters attached to this code

User selections:
- Belenms = 2
- Jeg = 2
- JianghuiDu = 1
- Jrichey = 1
- Khider = 1
- Lisiecki = 2

2017-03-07 21:52:44

For stable isotopes in foraminifera, should the analytical precision reported be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 1
- Jrichey = 1
- Khider = 3
- Williamrgray = 1

2017-03-07 21:52:00

For stable isotopes in foraminifera, should the property standard reported be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 1
- Jrichey = 3
- Khider = 1
- Williamrgray = 1

2017-03-07 21:46:12

For Mg/Ca in foraminifera, should the numbers of specimens utilized be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 2
- Jrichey = 2
- Khider = 2
- Williamrgray = 2

2017-03-07 21:45:47

For stable isotopes in foraminifera, should the numbers of specimens utilized be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 2
- Jrichey = 2
- Khider = 2
- Williamrgray = 2

2017-03-07 21:45:28

For stable isotopes in foraminifera, should the ChonMeasurementTable information be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 1
- Jrichey = 2
- Khider = 2
- Williamrgray = 2

2017-03-07 21:45:19

For stable isotopes in foraminifera, should the depth (position of the measurement in the archive) information be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 1
- Jrichey = 1
- Khider = 1
- Lisiecki = 1
- Williamrgray = 1
- Yzhou = 1

2017-03-07 21:45:08

For stable isotopes in foraminifera, should the location information (and water depth) be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 1
- Jrichey = 1
- Khider = 1
- Lisiecki = 1
- Williamrgray = 1
- Yzhou = 1

2017-03-07 21:45:08

For stable isotopes in foraminifera, should the sensor genus/species information be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 1
- Jrichey = 1
- Khider = 1
- Lisiecki = 1
- Williamrgray = 1

2017-03-07 21:26:49

For Mg/Ca in foraminifera, should the ChonMeasurementTable information be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 1
- Jrichey = 2
- Kau = 1
- Khider = 2
- Williamrgray = 1

2017-03-07 21:26:43

For Mg/Ca in foraminifera, should the depth (position of the measurement in the archive) information be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 1
- Jrichey = 1
- Kau = 1
- Khider = 1
- Williamrgray = 1

2017-03-07 21:26:36

For Mg/Ca in foraminifera, should the sensor genus/species information be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 1
- Jrichey = 1
- Kau = 1
- Khider = 1
- Williamrgray = 1

2017-03-07 21:26:26

For Mg/Ca in foraminifera, should the location information (especially in relation to water depth) be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- JianghuiDu = 1
- Jrichey = 1
- Kau = 1
- Khider = 1
- Williamrgray = 1

2017-02-17 20:34:57

Should the location information (especially in relation to water depth) be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Kau = 1

2016-11-21 19:20:30

Should raw peak areas (as opposed to just TEX86 index) be:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Belenms = 1
- Jrichey = 2
- Khider = 2
- SFeakins = 2

2016-11-07 21:26:18

What type of datasets should be considered "legacy"
1. Prior to Nov 7 2016
2. Pre-internet
3. Not contributed by author of original study
4. Other (comment below)

User selections:
- Edassie = 3
- Jeg = 2
- Kdelong = 4
- Khider = 3
- Lucienvg = 3
- Tfelis = 2

2016-11-07 20:07:13

Should the cleaning methodology be considered:
1. Essential Metadata
2. Recommended Metadata
3. Desired Metadata

User selections:
- Belenms = 3
- JianghuiDu = 1
- Jrichey = 2
- Kau = 2
- Khider = 2
- Lukas = 2
- Williamrgray = 1

2016-10-10 16:34:44

What should the scope of this working group be?
1. Solely the needs of the paleoclimate community 
2. Concentrate on the needs of the paleoclimate community initially while keeping in mind wider needs
3. Handle the needs of as many communities as possible

User selections:
- Acsank = 2
- Danielecolombaroli = 2
- EK Sutherland = 2
- Jeg = 2
- Khider = 2
- Petebrew = 2

2016-10-06 20:50:03

For new datasets, should information about uncertainty in the ChronData be 
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 1
- Edassie = 1
- Jeg = 1
- KMicha = 1
- Khider = 1
- Lucienvg = 1

2016-10-06 20:49:58

For new datasets, should the interpreted calendar age be
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 2
- Edassie = 1
- Jeg = 2
- KMicha = 2
- Khider = 2
- Lucienvg = 2

2016-10-06 20:49:43

For new datasets, should ChronData units (e.g., cm, per mil, deg C) be considered
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 1
- Edassie = 1
- Jeg = 1
- KMicha = 1
- Khider = 1
- Lucienvg = 1

2016-10-06 20:49:39

For new datasets, should the ChronData include the raw measurements (for instance radiocarbon)
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 1
- Edassie = 1
- Jeg = 1
- KMicha = 1
- Khider = 1
- Lucienvg = 1

2016-10-06 20:49:35

For new datasets, should the presence of ChronData information be (assuming no chronology in the PaleoData):
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 2
- Edassie = 1
- Jeg = 1
- KMicha = 2
- Khider = 1
- Lucienvg = 2

2016-10-06 20:49:25

For new datasets, should the presence of ChronData information be (assuming there is a chronology, maybe in addition to depth, in the PaleoData):
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 2
- Edassie = 1
- Jeg = 1
- KMicha = 2
- Khider = 1
- Lucienvg = 2

2016-10-06 20:48:09

For legacy datasets, should information about uncertainty in the ChronData be 
1. Essential
2. Recommended
3. Desired

User selections:
- Khider = 2
- Lucienvg = 2

2016-10-06 20:47:50

For legacy datasets, should the interpreted calendar age be
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 2
- Edassie = 2
- Khider = 2
- Lucienvg = 2

2016-10-06 20:47:29

For legacy datasets, should ChronData units (e.g., cm, per mil, deg C) be considered
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 1
- Edassie = 1
- Khider = 1
- Lucienvg = 1

2016-10-06 20:47:20

For legacy datasets, should the ChronData include the raw measurements (for instance radiocarbon)
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 1
- Khider = 2
- Lucienvg = 1

2016-10-06 20:38:00

For legacy datasets, should the presence of ChronData information be (assuming no chronology in the PaleoData):
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 1
- Khider = 2
- Lucienvg = 2

2016-10-06 20:37:40

For legacy datasets, should the presence of ChronData information be (assuming there is a chronology, maybe in addition to depth, in the PaleoData):
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 2
- Khider = 2
- Lucienvg = 2

2016-10-06 20:35:17

For legacy datasets, should information about uncertainty in the PaleoData be 
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 2
- Edassie = 1
- Khider = 2
- Lucienvg = 2

2016-10-06 20:35:13

For legacy datasets, If the interpretation is given, should information about the PaleoData calibration be
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 1
- Edassie = 2
- Khider = 3
- Lucienvg = 1

2016-10-06 20:35:08

For legacy datasets, should information about the interpretation of the PaleoData be
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 2
- Edassie = 1
- Khider = 2
- Lucienvg = 2

2016-10-06 20:35:04

For legacy datasets, should PaleoData units (e.g., cm, per mil, deg C) be considered
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 1
- Edassie = 1
- Khider = 1
- Lucienvg = 1

2016-10-06 20:34:56

For legacy datasets, should the PaleoData include the raw measurements (for instance d18O)
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 2
- Edassie = 1
- Khider = 2
- Lucienvg = 1

2016-10-06 20:34:50

For legacy datasets, should the PaleoData contain information about how this "depth" was transformed to age, and if possible give an estimate of age at each horizon in the archive.
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 2
- Edassie = 1
- Khider = 2
- Lucienvg = 2

2016-10-06 20:34:46

For legacy datasets, should PaleoData depth be:
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 1
- Edassie = 1
- Khider = 2
- Lucienvg = 1

2016-10-06 20:34:39

For legacy datasets, should the presence of PaleoData information be:
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 3
- Edassie = 1
- Khider = 1
- Lucienvg = 1

2016-10-06 20:30:24

For new datasets, should PaleoData depth be:
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 2
- Edassie = 1
- Jeg = 1
- Khider = 1
- Lucienvg = 1

2016-10-06 20:29:49

For new datasets, should information about the interpretation of the PaleoData be
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 3
- Edassie = 1
- Jeg = 2
- Khider = 2
- Lucienvg = 2

2016-10-06 20:29:49

For new datasets, should PaleoData units (e.g., cm, per mil, deg C) be considered
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 1
- Edassie = 1
- Jeg = 1
- Khider = 1
- Lucienvg = 1
- Petebrew = 1

2016-10-06 20:29:23

For new datasets, If the interpretation is given, should information about the PaleoData calibration be
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 1
- Edassie = 1
- Jeg = 2
- Khider = 3
- Lucienvg = 2

2016-10-06 20:29:18

For new datasets, should information about uncertainty in the PaleoData be 
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 2
- Edassie = 1
- Jeg = 1
- Khider = 2
- Lucienvg = 1

2016-10-06 19:41:47

For new datasets, should the PaleoData include the raw measurements (for instance d18O)
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 1
- Edassie = 1
- Jeg = 1
- Khider = 1
- Lucienvg = 1
- Petebrew = 1

2016-10-06 19:41:22

For new datasets, should the PaleoData contain information about how this "depth" was transformed to age, and if possible give an estimate of age at each horizon in the archive.
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 1
- Edassie = 1
- Jeg = 1
- Khider = 3
- Lucienvg = 1

2016-10-06 19:18:23

Should the LinkedEarth wiki contain datasets:
1. That have been published in peer-reviewed journals only
2. Both in peer-reviewed and non-peer reviewed publications (e.g. Dissertation)
3. Published as well as "old" datasets (a dataset the PI hasn't gone around to publish, probably never will but could be useful to the community)

User selections:
- ChristofPearce = 3
- Cpignol = 3
- Danielecolombaroli = 1
- Edassie = 3
- Jeg = 3
- KMicha = 3
- Kdelong = 1
- Khider = 3
- Lucienvg = 3
- Michaelerb = 1
- Petebrew = 3
- Tfelis = 1

2016-10-06 19:02:32

For new records, should the presence of PaleoData information be:
1. Essential
2. Recommended
3. Desired

User selections:
- Edassie = 1
- Jeg = 1
- Kau = 1
- Khider = 2
- Lucienvg = 1

2016-10-05 23:33:14

For legacy datasets, should grant number be:
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 3
- Edassie = 2
- Khider = 3
- Lucienvg = 3

2016-10-05 23:33:11

For legacy datasets, should funding country be:
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 3
- Edassie = 2
- Khider = 3
- Lucienvg = 3

2016-10-05 23:33:08

For legacy datasets, should publication year be:
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 1
- Edassie = 2
- Khider = 2
- Lucienvg = 1

2016-10-05 23:33:08

For legacy datasets, should principal investigator be:
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 3
- Edassie = 2
- Khider = 3
- Lucienvg = 2

2016-10-05 23:33:08

For legacy datasets, should funding agency be:
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 3
- Edassie = 2
- Khider = 3
- Lucienvg = 3

2016-10-05 23:33:08

For legacy datasets, should doi be:
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 3
- Edassie = 1
- Khider = 2
- Lucienvg = 2

2016-10-05 23:33:08

For legacy datasets, should authors be:
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 1
- Edassie = 2
- Khider = 2
- Lucienvg = 1

2016-10-05 23:33:08

For legacy datasets, should title be:
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 1
- Edassie = 2
- Khider = 2
- Lucienvg = 1

2016-10-05 23:32:51

For legacy datasets, should longitude be:
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 1
- Edassie = 1
- Khider = 1
- Lucienvg = 1
- Lukas = 1

2016-10-05 23:32:51

For legacy datasets, should altitude be:
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 1
- Edassie = 1
- Khider = 1
- Lucienvg = 1
- Lukas = 1

2016-10-05 23:32:46

For legacy datasets, should latitude be:
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 1
- Edassie = 1
- Khider = 1
- Lucienvg = 1
- Lukas = 1

2016-10-05 23:32:38

For legacy datasets, should contributor be:
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 2
- Edassie = 1
- Khider = 1
- Lucienvg = 1

2016-10-05 23:31:49

For new datasets, should grant number be:
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 2
- Edassie = 2
- Jeg = 3
- KMicha = 3
- Kau = 3
- Khider = 1
- Lucienvg = 2

2016-10-05 23:31:39

For new datasets, should funding country be:
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 3
- Edassie = 2
- Jeg = 3
- KMicha = 3
- Kau = 3
- Khider = 3
- Lucienvg = 2

2016-10-05 23:31:29

For new datasets, should funding agency be:
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 2
- Edassie = 2
- Jeg = 3
- KMicha = 3
- Kau = 3
- Khider = 1
- Lucienvg = 2

2016-10-05 23:31:20

For new datasets, should principal investigator be:
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 2
- Edassie = 1
- Jeg = 3
- KMicha = 2
- Kau = 3
- Khider = 2
- Lucienvg = 1

2016-10-05 23:31:05

For new datasets, should doi be:
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 1
- Edassie = 1
- Jeg = 2
- KMicha = 2
- Kau = 1
- Khider = 1
- Lucienvg = 1

2016-10-05 23:30:59

For new datasets, should title be:
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 1
- Edassie = 1
- Jeg = 1
- KMicha = 2
- Kau = 1
- Khider = 2
- Lucienvg = 1

2016-10-05 23:30:50

For new datasets, should publication year be:
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 1
- Edassie = 1
- Jeg = 1
- KMicha = 2
- Kau = 2
- Khider = 2
- Lucienvg = 1

2016-10-05 23:30:39

For new datasets, should authors be:
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 1
- Edassie = 1
- Jeg = 1
- KMicha = 2
- Kau = 2
- Khider = 2
- Lucienvg = 1

2016-10-05 23:30:26

For new datasets, should altitude be:
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 1
- Edassie = 1
- Jeg = 1
- KMicha = 2
- Kau = 1
- Khider = 1
- Lucienvg = 1

2016-10-05 23:30:04

For new datasets, should longitude be:
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 1
- Edassie = 1
- Jeg = 1
- KMicha = 2
- Kau = 1
- Khider = 1
- Lucienvg = 1
- Michaelerb = 1

2016-10-05 23:29:47

For new datasets, should latitude be:
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 1
- Edassie = 1
- Jeg = 1
- KMicha = 2
- Kau = 1
- Khider = 1
- Lucienvg = 1
- Michaelerb = 1

2016-10-05 23:29:37

For new datasets, should contributor be:
1. Essential
2. Recommended
3. Desired

User selections:
- ChristofPearce = 1
- Edassie = 1
- Jeg = 1
- KMicha = 2
- Kau = 1
- Khider = 1
- Lucienvg = 2
- Michaelerb = 1

2016-10-05 23:28:40

Should latitude be:
1. Essential
2. Recommended
3. Desired

User selections:
- Khider = 1

2016-10-05 23:28:34

Should contributor be:
1. Essential
2. Recommended
3. Desired

User selections:
- Khider = 1

2016-10-05 22:48:43

Should this property be:
1. Essential
2. Recommended
3. Desired

User selections:
- Khider = 1
- Michaelerb = 1

2016-09-23 22:07:06

Are you a LinkedEarth member?
1. Yes
2. No

User selections:
- Khider = 1

2016-09-21 19:18:57

What should be the primary way of reporting depth of samples taken from lake sediments:
1. Mid-point depth and thickness
2. Top and bottom depth
3. Something else

User selections:
- Belenms = 1
- Cpignol = 2
- Danielecolombaroli = 1
- Khider = 1
- Lucienvg = 2
- Nick mckay = 1
- Pfrancus = 2
- SFeakins = 1
- Santi = 2
- SimonGoring = 3

2016-09-15 22:22:25

What is your favorite poll?
1. A poll that is droll
2. A poll with a role
3. A poll with a roll

User selections:
- Edassie = 2

2016-09-14 22:02:01

What should we do with legacy chronologies?
1. Contact original authors to obtain their uncalibrated dates
2. Curse authors who were too short-sighted to archive uncalibrated dates
3. Ignore them altogether

User selections:
- Acsank = 2
- Khider = 1
- Lucienvg = 1
- Pbecker = 1
- Petebrew = 1
- SimonGoring = 2

2016-09-14 21:59:51

What is your favorite chronology poll?
1. A poll that is droll
2. A poll with a role
3. A poll with a roll

User selections:
- Acsank = 1
- Khider = 3
- Lucienvg = 1

2016-09-07 17:12:09

Do you endorse X, Y Z as the three (and only three) essential metadata fields for datasets derived from marine sediments?
1. Yes
2. No
3. Maybe so

User selections:
- Lukas = 2

2016-07-26 23:49:53

Do you like this property ?
1. Yes, it is awesome.
2. Yes.
3. No, I do not like it.

User selections:
- Jeg = 1