Category:Marine Sediment Working Group
Contents
Overview
In the Linked Earth context, a working group (WG) is a self-organized coalition of knowledgeable experts, whose activities are governed herewith. This page is dedicated to the discussion of data and metadata standards for marine sedimentary archives (see this page for a definition of Marine Sediment Archive), and aims to formulate a set of recommendations for such a standard.
Members
The group currently has one coordinator, Julie Richey (USGS)
Members of 'Marine Sediment Working Group'
This working group has 16 members.
Specific tasks
We recommend that discussions focus on the following considerations, and explore potential commonalities.
For each observation type, we recommend:
- structuring discussions around what scientific questions one would want to ask of the data
- listing essential, recommended, and optional information for:
- the measurements themselves
- any inference made from the measurements (e.g. calibration to temperature)
- the underlying uncertainties, and what those numbers correspond to (e.g. 1-sigma or 2-sigma?)
- providing an ideal data table, so the community knows what to report and how to report it.
- providing separate recommendations for new and legacy datasets, and for how to label measured and inferred variable (e.g. Mg/Ca is measured, temperature is inferred)
- thinking about how the rest of the paleoscience community, or other (non)scientists may make use of the data you describe.
Marine sediments are a very ubiquitous archive on which many types of observations are made, and involving thousands of people around the world. It seems wise for this WG to rally around sub-groups start dedicated to data standards about the following sensors/observation types.
Previous standardization efforts
A discussion regarding paleoclimate data standards was started during the PMIP Ocean Workshop: Understanding changes since the Last Glacial Maximum (hereafter, PMIP_LGM) in Corvallis, OR in December 2013. Given the expertise of the working group members, the discussion focus on sedimentary archives. Meeting notes can be found here and summarized in the sections below.
The recommendations made at the workshop concerned new datasets only. It was recognized that different sets of standards would be necessary for legacy datasets.
Types of Data
There are three principle types of data that are relevant for the paleoceanography/paleoclimatology community:
- Original data values – this would include raw values of all variables measured or otherwise determined on the substrate of interest, recorded against an unambiguous sample identifier (for instance, depth in the archive). This includes age control points (ACP) used to derive the age model of the paleo-time series, including radioisotopes (14C, excess 210Pb), and benthic stack comparison. All data that are reported for the first time in a scientific publication should be treated as original. The procedure of obtaining original data should be documented such as to allow full replication of the results. In the LinkedEarth Ontology, the original data values are referred as Category:MeasuredVariable_©.
You are not entitled to view results of this poll.
You are not entitled to view results of this poll.
Depth can be problematic as a unique identifier since there are several to calculate or report depth in a sample (i.e., top-depth, mid-depth, depth interval.) and IODP uses several depth scales.
You are not entitled to view results of this poll.
Deborah Khider (talk) 15:29, 7 March 2017 (PST): I probably forgot ways of expressing depth, please add comments below.
- Derived data values – this category refers to values of variables derived from other variables, derived or raw, original or compiled, reported against an unambiguous sample identifier and accompanied with a documentation of the derivation procedure such as to allow full replication of the result. This category includes algorithms of any kind relating depth to age that have been used to assign ages to values of raw or derived variables. In the LinkedEarth Ontology, derived data values are referred to as Category:InferredVariable_©.
The derivation procedure is contained in the Category: CalibrationModel_©.
You are not entitled to view results of this poll.
You are not entitled to view results of this poll.
- Compilation of data values – this refers to raw values of all variables from published sources, gathered for the purpose of quantitative treatment, recorded against an unambiguous sample identifier and labelled with an unambiguous reference to the publication where such data were originally presented. Reporting of data compilations is required wherever these are used to derive patterns or variables from the data other than those reported in the original publication.
You are not entitled to view results of this poll.
Geochemical Data
Foraminiferal Geochemistry
Stable isotopes
In the following table, enter the metadata that you'd wish every member of the stable isotope community would enter to make their data reproducible. To add more lines, follow this guide. For a definition of Essential (E)/ Recommended (R)/ Desired (D), see this page.
Metadata | Essential (E)/ Recommended (R) / Desired (D) | Reason | Added by (optional) |
---|---|---|---|
Category: Location_© (Lat, Lon) | E | Location is a must | Kau (talk) 13:34, 7 March 2017 (PST) |
Property:Wgs84:Alt © (Depth) | R | Especially for deep-sea drilling sediments, water depths can be important to assess various biogeochemical properties and parameters of stable isotopic parameters | Kau (talk) 13:34, 7 March 2017 (PST) |
Property:SensorGenus_© Property:SensorSpecies_© | E | Species information needed to infer which section of the water column is being recorded | Kau (talk) 13:34, 7 March 2017 (PST) |
Cleaning Methodology | R | Useful to correct for offsets, especially for compilation work although a quick plot can often help figure out the cleaning methodology | Kau (talk) 13:34, 7 March 2017 (PST) |
Sample Depth | E | Positional information needed to relate the samples back to the archive | Kau (talk) 13:34, 7 March 2017 (PST) |
ChonDataTable | E for new datasets/ R for legacy datasets | The raw radiocarbon, tie points, 210Pb measurements should be made available so that age models can be updated in light of new calibration curves or new age modeling techniques | Kau (talk) 13:34, 7 March 2017 (PST) |
Number of specimens utilized per sample | R | The number of foraminiferal tests used per sample can be used to understand the sampling uncertainity associated with the measurements based on the signal-to-noise ratio of the climate signal at the location (planktic foraminifera live for 2-4 weeks) | Kau (talk) 13:34, 7 March 2017 (PST) |
Property:Standard © | E | The standard against which the measurements are reported (especially for d18O). VBDP vs VSMOW | Deborah Khider (talk) 13:41, 7 March 2017 (PST) |
Analytical Precision | R | The machine precision based on reproducability of standards | Kau (talk) 13:49, 7 March 2017 (PST) |
To gather rapid feedback on whether the proposed metadata should be essential, recommended or optional, answer the polls below:
You are not entitled to view results of this poll.
You are not entitled to view results of this poll.
You are not entitled to view results of this poll.
You are not entitled to view results of this poll.
You are not entitled to view results of this poll.
You are not entitled to view results of this poll.
You are not entitled to view results of this poll.
Trace Metals
Mg/Ca
In the following table, enter the metadata that you'd wish every member of the Mg/Ca community would enter to make their data reproducible. To add more lines, follow this guide. For a definition of Essential (E)/ Recommended (R)/ Desired (D), see this page.
Metadata | Essential (E)/ Recommended (R) / Desired (D) | Reason | Added by (optional) |
---|---|---|---|
Category: Location_© (Lat, Lon) | E | Location is a must | Deborah Khider (talk) 12:37, 17 February 2017 (PST) |
Property:Wgs84:Alt © (Depth) | E | Water depth can be useful to get an idea of dissolution in the core. Especially for deep-sea drilling sediments, water depths can be important to assess various biogeochemical properties and parameters of stable isotopic parameters | Kau (talk) 13:39, 7 March 2017 (PST) |
Property:SensorGenus_© Property:SensorSpecies_© | E | Species information needed to infer which section of the water column is being recorded | Deborah Khider (talk) 12:37, 17 February 2017 (PST) |
Cleaning Methodology | R | Useful to correct for offsets, especially for compilation work although a quick plot can often help figure out the cleaning methodology | Deborah Khider (talk) 12:37, 17 February 2017 (PST) |
Sample Depth | E | Positional information needed to relate the samples back to the archive | Deborah Khider (talk) 12:37, 17 February 2017 (PST) |
ChonDataTable | E for new datasets/ R for legacy datasets | The raw radiocarbon, tie points, 210Pb measurements should be made available so that age models can be updated in light of new calibration curves or new age modeling techniques | Deborah Khider (talk) 12:37, 17 February 2017 (PST) |
Number of specimens utilized per sample | R | The number of foraminiferal tests used per sample can be used to understand the sampling uncertainity associated with the measurements based on the signal-to-noise ratio of the climate signal at the location (planktic foraminifera live for 2-4 weeks) | Kau (talk) 13:17, 7 March 2017 (PST) |
Analytical Precision | D | Uncertainty in the measurements | Deborah Khider (talk) 13:51, 7 March 2017 (PST) |
To gather rapid feedback on whether the proposed metadata should be essential, recommended or optional, answer the polls below:
You are not entitled to view results of this poll.
You are not entitled to view results of this poll.
You are not entitled to view results of this poll.
You are not entitled to view results of this poll.
You are not entitled to view results of this poll.
You are not entitled to view results of this poll.
You are not entitled to view results of this poll.
Organic Geochemistry
Alkenones
GDGTs
You are not entitled to view results of this poll.
Compound specific isotopes
Physical Data
Grain Size
Micropaleontological Data
- Report raw counts if available. And if not, at least
- Minimum number of specimens counted
- Size fraction
If the data were used to infer temperature or sea ice concentration, then the method (MAT, WA-PLS, etc) and the training set should be mentioned/required metadata.
Polls
Here are three example polls that the group might want to consider:
For NEW DATASETS:
You are not entitled to view results of this poll.
For LEGACY DATASETS:
You are not entitled to view results of this poll.
This is an example poll. To vote on what should be considered Legacy, see this page.
You are not entitled to view results of this poll.
Pages in category "Marine Sediment Working Group"
This category contains only the following page.