Difference between revisions of "Creating a LiPD file"

From Linked Earth Wiki
Jump to: navigation, search
( Pages with syntax highlighting errors )
(Metadata: Screenshot of Excel Spreadsheet showing the sensor species and genus information)
(How do I get my data into LiPD?: create online lipidifier section)
 
(17 intermediate revisions by 4 users not shown)
Line 29: Line 29:
 
== How do I get my data into LiPD?==
 
== How do I get my data into LiPD?==
  
As of April 2017, the most efficient way to get you paleoclimate dataset in LiPD format is to fill out our template ([[File:LiPDv1.2_template.xlsx|alt:Excel Template]]) and use the Python [[LiPD Utilities]] to convert the template into a [[Linked Paleo Data | LiPD]] file. Make sure you are using the latest version of the template for compatibility.
+
There are two ways to get your data into a LiPD file:
 
+
* Using the "online lipdifier", which is the most straightforward way for simple entries not containing ensemble tables.
By the end of 2017, a web-based interface should be able to automate a lot of the manual steps.  
+
* For datasets with ensemble tables, we recommend using the Excel template, adding the appropriate ensemble table sheets ([[File:LiPDv1.2_template.xlsx|alt:Excel Template]]) and use the Python [[LiPD Utilities]] to convert the template into a [[Linked Paleo Data | LiPD]] file. Make sure you are using the latest version of the template for compatibility.  
  
 
=== General Guidelines ===
 
=== General Guidelines ===
Line 43: Line 43:
  
 
===== Signal Level =====
 
===== Signal Level =====
All the paleo data recording the same environmental signal (ii.e. having the same [[:Category:Interpretation_(L)]]). Again, there are exception, such as studies done at the same site by different groups and very different points in time.
+
All the paleo data recording the same environmental signal (i.e. having the same [[:Category:Interpretation_(L)]]). Again, there are exceptions, such as studies done at the same site by different groups and very different points in time.
Follow-up studies where one investigator goes back to the same site to expand the dataset (e.g. longer core/higher resolution sampling) probably warrants a new LiPD file, unless the results don't lead to any science, in which case it qualifies more as a "replication" study.
+
Follow-up studies where one investigator goes back to the same site to expand the dataset (e.g. longer core/higher resolution sampling) probably warrant a new LiPD file, unless the results don't lead to any science, in which case they might qualifies more as a "replication" study, and be included as a separate data table in the same LiPD file.  
  
 
Examples:  
 
Examples:  
Line 68: Line 68:
 
==== What constitutes a [[:Category:MeasurementTable (L) | measurement table]]? ====
 
==== What constitutes a [[:Category:MeasurementTable (L) | measurement table]]? ====
  
Simply put, one table/physical sample. So if a study uses two speleothems, the measurements for each sample should be reported in two different tables.
+
Simply put, one table per physical sample. So if a study uses two speleothems, the measurements for each sample should be reported in two different tables.
  
 
A good rule of thumb is to ask: How is the data going to be reused? For instance, if radiocarbon chronologies for different cores are meant to be independent of each other, then each physical sample should get their own [[:Category:MeasurementTable (L) |  measurement table]]. On the other hand, if a composite depth is used, then the measurements for each physical sample can be placed in the same table.
 
A good rule of thumb is to ask: How is the data going to be reused? For instance, if radiocarbon chronologies for different cores are meant to be independent of each other, then each physical sample should get their own [[:Category:MeasurementTable (L) |  measurement table]]. On the other hand, if a composite depth is used, then the measurements for each physical sample can be placed in the same table.
 +
 +
=== Online Lipidifier ===
 +
 +
The web-based interface can be accessed [http://lipd.net/playground here]. Please not that there are know compatibility issues with Safari.
 +
 +
==== Instructions ====
 +
 +
  
 
=== Excel Template ===
 
=== Excel Template ===
Line 81: Line 89:
  
 
Right-click on the name of the file and select 'Download Linked File'.
 
Right-click on the name of the file and select 'Download Linked File'.
 +
 +
'''Important''': Rename the file to be consistent with the [[#Metadata | DatasetName]].
  
 
<br clear=all>
 
<br clear=all>
Line 112: Line 122:
 
Let's use a practical example. If the dataset you're working with only contains [[Sea Surface Temperature]] values and not the associated [[Sr/Ca]] data that the temperature [[:Property:inferredFrom (L) | inferred from]], then create another column filled with the missing value flag for the datasets, using the [[Sr/Ca]] header. In the mediate section, only fill out the [[:Property:Name (L)  |name]], variableType ([[:Category:MeasuredVariable (L) | measured]] or [[:Category:InferredVariable (L) | inferred]]), and [[:Property:ProxyObservationType (L) | ProxyObservationType]] for the variable (in this case, [[Sr/Ca]]).  
 
Let's use a practical example. If the dataset you're working with only contains [[Sea Surface Temperature]] values and not the associated [[Sr/Ca]] data that the temperature [[:Property:inferredFrom (L) | inferred from]], then create another column filled with the missing value flag for the datasets, using the [[Sr/Ca]] header. In the mediate section, only fill out the [[:Property:Name (L)  |name]], variableType ([[:Category:MeasuredVariable (L) | measured]] or [[:Category:InferredVariable (L) | inferred]]), and [[:Property:ProxyObservationType (L) | ProxyObservationType]] for the variable (in this case, [[Sr/Ca]]).  
  
If your table contains more than 14 columns, you can inset the corresponding lines for the metadata. Make sure you copy and paste the formulas from the previous lines!
+
If your table contains more than 14 columns, you can inset the corresponding lines for the metadata. Make sure you copy and paste the formulas from the previous lines!  
 +
If you have less than 14 variables, clear the content of the cells (In Excel, right click -> Clear contents) but '''DO NOT''' delete the rows (i.e. leave them blank). Also clear the unused headers in the table.
  
 
Fill in as many fields of the template as possible. Future generations of researchers will thank you!
 
Fill in as many fields of the template as possible. Future generations of researchers will thank you!
Line 181: Line 192:
  
 
[[File:ExcelTemplate DataTable Metadata.png | thumb |right |300px | Example of metadata for the [[:Category:Variable (L) | variables]] in a [[:Category:DataTable (L)| DataTable]]: [[:Property:Name (L) | name]], variableType ([[:Category:MeasuredVariable (L)| measured variable]] or [[:Category:InferredVariable (L) | inferred variable]]), [[:Property: HasUnits (L) | units]], [[:Property:ProxyObservationType (L) | ProxyObservationType]], [[:Property:InferredVariableType (L)| InferredVariableType]], [[:Property:TakenAtDepth (L) | TakenAtDepth]], [[:Property:InferredFrom (L) | inferred from]], and [[:Property:Notes (L) | notes]].]]
 
[[File:ExcelTemplate DataTable Metadata.png | thumb |right |300px | Example of metadata for the [[:Category:Variable (L) | variables]] in a [[:Category:DataTable (L)| DataTable]]: [[:Property:Name (L) | name]], variableType ([[:Category:MeasuredVariable (L)| measured variable]] or [[:Category:InferredVariable (L) | inferred variable]]), [[:Property: HasUnits (L) | units]], [[:Property:ProxyObservationType (L) | ProxyObservationType]], [[:Property:InferredVariableType (L)| InferredVariableType]], [[:Property:TakenAtDepth (L) | TakenAtDepth]], [[:Property:InferredFrom (L) | inferred from]], and [[:Property:Notes (L) | notes]].]]
 
[[File:ExcelTemplate DataTable Metadata Interpretation.png|right|thumb|300px| Example of metadata from the [[:Category:Interpretation (L) | interpretation]] field for [[:Category:Variable (L) | variables]] in a [[:Category:DataTable (L)| DataTable]]: [[:Property:Name (L) | name]], [[:Property: detail (L) | variableDetail]], [[:Property:HasRank (L) | rank]] (i.e., importance) of the [[:Category:Interpretation (L) | interpretation]], [[:Property:InterpretationReferences (L) | basis]] of the [[:Category:Interpretation (L) | interpretation]], [[:Property:IsLocal (L) | isLocal]], [[:Property:InterpretationDirection (L) | the direction]] of the [[:Category:Interpretation (L) | interpretation]], and the [[:Property:Scope (L) | scope]] of the [[:Category:Interpretation (L) | interpretation]].]]
 
 
[[File:ExcelTemplate DataTable Metadata Calibration.png|thumb|right|300px| Example of metadata from the [[:Category:CalibrationModel (L) | calibration]] field for [[:Category:Variable (L) | variables]] in a [[:Category:DataTable (L)| DataTable]]: the [[:Category:CalibrationModel (L) | calibration]] [[:Property:Equation (L) | equation]], [[:Property:Notes (L) | notes]], [[:Property:CalibrationReferences (L) | calibration reference]], and the associated [[:Category:Uncertainty (L) | uncertainty]].]]
 
 
[[File:ExcelTemplate DataTable ProxySensor Metadata.png|thumb|right|300px|Example of metadata pertaining to the [[:Category:ProxySensor (L) | proxy sensor]]: [[:Property:SensorGenus (L) | the genus]] and [[:Property:SensorSpecies (L) | the species]].]]
 
  
 
Each row corresponds to the metadata associated with each of the column in the data table. If your data table contains more than 14 variables, you can insert lines below <variable14>. '''Make sure you copy and paste the formulas from the previous lines!'''
 
Each row corresponds to the metadata associated with each of the column in the data table. If your data table contains more than 14 variables, you can insert lines below <variable14>. '''Make sure you copy and paste the formulas from the previous lines!'''
*''variableName'': The [[:Property:Name (L)| name of the variable]]. It is automatically lifted from the column headers.
+
*''variableName'': The [[:Property:Name (L)| name of the variable]]. It is automatically lifted from the column headers. '''THESE NEED TO MATCH'''. Do not use parenthesis for anything besides units. Use the notes instead.
 +
* ''units'': If no units (because the quantity is a string or a ratio), write "unitless".
 
*''variableType'': Use the drop-down menu to select either [[:Category:MeasuredVariable (L) | measured]] or [[:Category:InferredVariable (L) | inferred]]. This is required information to set the proper page category on the wiki (and therefore associated property).
 
*''variableType'': Use the drop-down menu to select either [[:Category:MeasuredVariable (L) | measured]] or [[:Category:InferredVariable (L) | inferred]]. This is required information to set the proper page category on the wiki (and therefore associated property).
 
*''units'': The [[:Property:HasUnits (L)| units]] in which the variable is expressed.
 
*''units'': The [[:Property:HasUnits (L)| units]] in which the variable is expressed.
Line 197: Line 203:
 
*''InferredFrom'': This property links the [[:Category:InferredVariable (L) | inferred variable]] to the [[:Category:MeasuredVariable (L) | measured variable]] from which it has been derived. If the actual values of the measured variable are not provided (for instance, in the case of a legacy dataset), add a dummy column in the DataTable as explained in the [[#General Instructions | general instructions]].  
 
*''InferredFrom'': This property links the [[:Category:InferredVariable (L) | inferred variable]] to the [[:Category:MeasuredVariable (L) | measured variable]] from which it has been derived. If the actual values of the measured variable are not provided (for instance, in the case of a legacy dataset), add a dummy column in the DataTable as explained in the [[#General Instructions | general instructions]].  
 
*''notes'': [[:Property:Notes (L) | notes]] regarding the specific variable. Notes pertaining to the entire measurement table should be entered on the first row of the Excel sheet.
 
*''notes'': [[:Property:Notes (L) | notes]] regarding the specific variable. Notes pertaining to the entire measurement table should be entered on the first row of the Excel sheet.
 +
 +
[[File:ExcelTemplate DataTable Metadata Interpretation.png|right|thumb|300px| Example of metadata from the [[:Category:Interpretation (L) | interpretation]] field for [[:Category:Variable (L) | variables]] in a [[:Category:DataTable (L)| DataTable]]: [[:Property:Name (L) | name]], [[:Property: detail (L) | variableDetail]], [[:Property:HasRank (L) | rank]] (i.e., importance) of the [[:Category:Interpretation (L) | interpretation]], [[:Property:InterpretationReferences (L) | basis]] of the [[:Category:Interpretation (L) | interpretation]], [[:Property:IsLocal (L) | isLocal]], [[:Property:InterpretationDirection (L) | the direction]] of the [[:Category:Interpretation (L) | interpretation]], and the [[:Property:Scope (L) | scope]] of the [[:Category:Interpretation (L) | interpretation]].]]
 +
 
*''Interpretation'': The [[:Category:Interpretation (L) | Interpretation category]] allows to describe the phenomena that drove the [[:Category:Variable (L) | variable]].
 
*''Interpretation'': The [[:Category:Interpretation (L) | Interpretation category]] allows to describe the phenomena that drove the [[:Category:Variable (L) | variable]].
 
** ''Interpretation1_variable'': The [[:Property:Name (L) | name]] of the [[:Category:Interpretation (L) | Interpretation variable]]. For instance, the [[:Category:MeasuredVariable (L) | measured variable]] [[Mg/Ca]] is [[:Property:interpretedAs (L) | interpreted as]] [[Temperature]]. In the LiPD framework (and by extension LinkedEarth wiki), an [[:Category:InferredVariable (L) | inferred variable]].  
 
** ''Interpretation1_variable'': The [[:Property:Name (L) | name]] of the [[:Category:Interpretation (L) | Interpretation variable]]. For instance, the [[:Category:MeasuredVariable (L) | measured variable]] [[Mg/Ca]] is [[:Property:interpretedAs (L) | interpreted as]] [[Temperature]]. In the LiPD framework (and by extension LinkedEarth wiki), an [[:Category:InferredVariable (L) | inferred variable]].  
Line 206: Line 215:
 
**''Interpretation1_scope'': Part of the [[:Category:Interpretation (L) | interpretation]] that describes whether the [[:Category:Interpretation (L) | interpretation]] relates to climate (e.g., [[Temperature]]), isotopes (e.g., [[D18O]] of precipitation), or ecology. Select one from the drop-down menu or enter a new one.   
 
**''Interpretation1_scope'': Part of the [[:Category:Interpretation (L) | interpretation]] that describes whether the [[:Category:Interpretation (L) | interpretation]] relates to climate (e.g., [[Temperature]]), isotopes (e.g., [[D18O]] of precipitation), or ecology. Select one from the drop-down menu or enter a new one.   
 
'''Note''': To add an additional interpretation, copy and paste the headers modifying them to ''Interpretation2_variable'', ''Interpretation2_variableDetail'', ''Interpretation2_rank'', ''Interpretation2_basis'', ''Interpretation2_local'', ''Interpretation2_interpDirection'', ''Interpretation2_scope''... Then copy and paste the formulas for the drop-down menus.
 
'''Note''': To add an additional interpretation, copy and paste the headers modifying them to ''Interpretation2_variable'', ''Interpretation2_variableDetail'', ''Interpretation2_rank'', ''Interpretation2_basis'', ''Interpretation2_local'', ''Interpretation2_interpDirection'', ''Interpretation2_scope''... Then copy and paste the formulas for the drop-down menus.
 +
 +
[[File:ExcelTemplate DataTable Metadata Calibration.png|thumb|right|300px| Example of metadata from the [[:Category:CalibrationModel (L) | calibration]] field for [[:Category:Variable (L) | variables]] in a [[:Category:DataTable (L)| DataTable]]: the [[:Category:CalibrationModel (L) | calibration]] [[:Property:Equation (L) | equation]], [[:Property:Notes (L) | notes]], [[:Property:CalibrationReferences (L) | calibration reference]], and the associated [[:Category:Uncertainty (L) | uncertainty]].]]
 +
 
*''Calibration'': The [[:Category:CalibrationModel (L) | calibration]] section allows to enter information regarding how the [[:Category:MeasuredVariable (L) | measured variable]] is transformed into the [[:Category:InferredVariable (L) | inferred variable]].  
 
*''Calibration'': The [[:Category:CalibrationModel (L) | calibration]] section allows to enter information regarding how the [[:Category:MeasuredVariable (L) | measured variable]] is transformed into the [[:Category:InferredVariable (L) | inferred variable]].  
 
**''calibration_equation'': The mathematical [[:Property:Equation (L) | equation]] used in the [[:Category:CalibrationModel (L) | calibration]]. For instance, if using the Anand et al. (2003) <ref name =anand2003> P Anand, Elderfield, H., Conte, M.H. (2003) Calibration of Mg/Ca thermometry in planktonic foraminifera from a sediment trap time series. Paleoceanography, 18 (2), 1050, doi:10.1029/2002PA000846 </ref> general equation, enter ''Mg/Ca = 0.38exp(0.09T)''.  
 
**''calibration_equation'': The mathematical [[:Property:Equation (L) | equation]] used in the [[:Category:CalibrationModel (L) | calibration]]. For instance, if using the Anand et al. (2003) <ref name =anand2003> P Anand, Elderfield, H., Conte, M.H. (2003) Calibration of Mg/Ca thermometry in planktonic foraminifera from a sediment trap time series. Paleoceanography, 18 (2), 1050, doi:10.1029/2002PA000846 </ref> general equation, enter ''Mg/Ca = 0.38exp(0.09T)''.  
Line 212: Line 224:
 
**''calibration_uncertainty'': The value of the [[:Category:Uncertainty (L) | uncertainty]] associated with the [[:Category:CalibrationModel (L) | calibration]].  
 
**''calibration_uncertainty'': The value of the [[:Category:Uncertainty (L) | uncertainty]] associated with the [[:Category:CalibrationModel (L) | calibration]].  
 
**''calibration_uncertaintyType'': The type of [[:Category:Uncertainty (L) | uncertainty]] (e.g., RMSE).
 
**''calibration_uncertaintyType'': The type of [[:Category:Uncertainty (L) | uncertainty]] (e.g., RMSE).
 +
 +
[[File:ExcelTemplate DataTable ProxySensor Metadata.png|thumb|right|300px|Example of metadata pertaining to the [[:Category:ProxySensor (L) | proxy sensor]]: [[:Property:SensorGenus (L) | the genus]] and [[:Property:SensorSpecies (L) | the species]].]]
 +
 
*''sensorSpecies'': For [[:Category:OrganicProxySensor  | organic proxy sensor]] such as [[:Category:Foraminifera | foraminifera]], [[:Category:Tree | trees]], [[:Category:Mollusk | mollusk]], etc..., the [[:Property:SensorSpecies (L) | species name]].
 
*''sensorSpecies'': For [[:Category:OrganicProxySensor  | organic proxy sensor]] such as [[:Category:Foraminifera | foraminifera]], [[:Category:Tree | trees]], [[:Category:Mollusk | mollusk]], etc..., the [[:Property:SensorSpecies (L) | species name]].
 
*''sensorGenus'': For [[:Category:OrganicProxySensor | organic proxy sensor]] such as [[:Category:Foraminifera | foraminifera]], [[:Category:Tree | trees]], [[:Category:Mollusk | mollusk]], etc..., the [[:Property:SensorGenus (L) | genus name]].
 
*''sensorGenus'': For [[:Category:OrganicProxySensor | organic proxy sensor]] such as [[:Category:Foraminifera | foraminifera]], [[:Category:Tree | trees]], [[:Category:Mollusk | mollusk]], etc..., the [[:Property:SensorGenus (L) | genus name]].
 +
 +
[[File:ExcelTemplate PhysicalSample Metadata.png|thumb|300px|right|Example of metadata from the [[:Category:PhysicalSample (L) | physical sample]] field for [[:Category:Variable (L) | variables]] in a [[:Category:DataTable (L)| DataTable]]: [[:Property:Name (L) | name]] of the [[:Category:PhysicalSample (L) | physical sample]], [[:Property:Dcterms:Identifier (L)| an alpha-numeric identifier]], the [[:Property:HasIGSN (L) | IGSN number]] if available, the [[:Property:HousedAt (L) | location]] of the sample, the [[:Property:method (L) | collection method]].]]
 +
 
*''[[:Category:PhysicalSample (L) | Physical Sample]]''
 
*''[[:Category:PhysicalSample (L) | Physical Sample]]''
 
** ''[[:Property:Name (L)| name]]'': The common name for the physical sample. For instance, "OPD 846".
 
** ''[[:Property:Name (L)| name]]'': The common name for the physical sample. For instance, "OPD 846".
** ''[[:Property:Dcterms:Identifier (L)| identifier]]'': A particular identifier for the sample. For instance, "CAS A" and "CAS D" were used to identify two speleothem samples from the same cave in the Reuter et al. (2009) <ref>Reuter, J,m L. Stott, D. Khider, A. Sinha, H. Cheng, R.L. Edwards (2009). A new perspective on the hydro climate variability in northern South America during the Little Ice Age. Geophysical Research Letters, 36, L21706, doe:10.1029/2009GL041051</ref>
+
** ''[[:Property:Dcterms:Identifier (L)| identifier]]'': A particular identifier for the sample. For instance, "CAS A" and "CAS D" were used to identify two speleothem samples from the same cave in the Reuter et al. (2009) <ref>Reuter, J,m L. Stott, D. Khider, A. Sinha, H. Cheng, R.L. Edwards (2009). A new perspective on the hydro climate variability in northern South America during the Little Ice Age. Geophysical Research Letters, 36, L21706, doi:10.1029/2009GL041051</ref>
 
**''[[:Property:hasIGSN (L) | hasIGSN]]'': The [http://www.geosamples.org/igsnabout IGSN] number if available
 
**''[[:Property:hasIGSN (L) | hasIGSN]]'': The [http://www.geosamples.org/igsnabout IGSN] number if available
 
**''[[:Property:housedAt (L) | housedAt]]'': In which location is the sample currently been curated. Can be the name of a laboratory or a central repository. On the wiki, this will linked to a standard page where information about the laboratory or repository can be entered.
 
**''[[:Property:housedAt (L) | housedAt]]'': In which location is the sample currently been curated. Can be the name of a laboratory or a central repository. On the wiki, this will linked to a standard page where information about the laboratory or repository can be entered.
 
**''[[:Property:method (L)| collectionMethod]]'': The method used to collect the sample (e.g., piston core, gravity core,...).
 
**''[[:Property:method (L)| collectionMethod]]'': The method used to collect the sample (e.g., piston core, gravity core,...).
 +
 +
The example referenced above can be found here: [[File:Excel to LiPD Template TestDataset.xlsx|Excel to LiPD Template TestDataset.xlsx]].
 +
 +
'''Note''': None of the metadata and data values in this example come from a real dataset.
 +
 
<br clear=all>
 
<br clear=all>
  
Line 229: Line 252:
  
 
In a terminal window, type: <pre> pip install lipd </pre>
 
In a terminal window, type: <pre> pip install lipd </pre>
 +
 +
For '''Python 3.6 users''', if the pip command fails, use the following: <pre> pip3 install --egg lipd </pre>
  
 
For more information about how to use the utilities, visit the [https://nickmckay.github.io/LiPD-utilities/ GitHub page].
 
For more information about how to use the utilities, visit the [https://nickmckay.github.io/LiPD-utilities/ GitHub page].
Line 237: Line 262:
 
<syntaxhighlight lang="python">
 
<syntaxhighlight lang="python">
 
#Import the package
 
#Import the package
import LiPD  
+
import lipd  
 
#The following command will trigger a GUI to navigate to the Excel file. If you know the path, you can enter it directly in the parenthesis (using quotes)         
 
#The following command will trigger a GUI to navigate to the Excel file. If you know the path, you can enter it directly in the parenthesis (using quotes)         
 
lipd.readExcel()     
 
lipd.readExcel()     
 
#Create your LiPD file
 
#Create your LiPD file
lipd.excel()
+
D = lipd.excel()
  
 
#Validating your file.
 
#Validating your file.
#The following command trigger a GUI to navigate to the newly created LiPD file. If you know the path, you can enter it directly in the parenthesis (using quotes)
 
lipd.readLiPD()
 
 
#The following command will validate your file to make sure that it's conformed to the LiPD requirements. If the validation step failed, make sure that all the fields in red have been completed.
 
#The following command will validate your file to make sure that it's conformed to the LiPD requirements. If the validation step failed, make sure that all the fields in red have been completed.
lipd.validate()
+
lipd.validate(D)
 
</syntaxhighlight>
 
</syntaxhighlight>
 +
 +
You can also use the [http://lipd.net/validator online validator] to validate your LiPD file!.
  
 
==References==
 
==References==

Latest revision as of 20:52, 23 July 2018

The most straightforward way to upload a dataset onto the wiki is to first create a LiPD file and upload it directly.

What is LiPD?

LiPD (Linked Paleo Data) is a convenient way to store and exchange paleoclimate data format and provides the backbone of the LinkedEarth edifice. LiPD is closely aligned with the LinkedEarth Ontology; changes in one are mirrored in the other.

How to read a LiPD file?

LiPD was designed so that is can capture much richer sets of (meta)data than ASCII or Excel files and to have a fixed backbone around which scientific codes can be built. There is a price to pay for this power: LiPD is undoubtedly more difficult to interact with than a plain text file. Although it is possible to unzip a LiPD file and navigate through the native JSON-LD and csv files, this not the best way to harness the power of LiPD files.

The easiest way to interact with a LiPD file is by using this very wiki, which allows you to navigate the hierarchical structure of the file easily.

In addition, we have developed several utilities to read and write LiPD files in Matlab, Python, and R.

What can I do with a LiPD file?

LiPD was designed to facilitate coding around paleoclimate data. We have already developed software in R and Python to analyze and visualize paleoclimate data:

In addition, CSciBox (an integrated system for age-model reconstruction) makes use of LiPD.

How do I get my data into LiPD?

There are two ways to get your data into a LiPD file:

  • Using the "online lipdifier", which is the most straightforward way for simple entries not containing ensemble tables.
  • For datasets with ensemble tables, we recommend using the Excel template, adding the appropriate ensemble table sheets (File:LiPDv1.2 template.xlsx) and use the Python LiPD Utilities to convert the template into a LiPD file. Make sure you are using the latest version of the template for compatibility.

General Guidelines

What goes into a LiPD file?

This is a trickier question than it appears at first. Consider two extremes: (1) every little data table could have its own LiPD file; (2) we could try and squeeze all the paleo data generated thus far into one giant LiPD file. Where is the happy medium? There are two ways to think about this:

Study Level

All data and metadata that are part of the same study should be placed in the same LiPD file. There are exceptions to this rule of thumb. For instance, if the study involves two physical samples in drastically different locations (i.e., different regimes), then each physical sample and associated data and metadata should be placed in separate LiPD files. In other words, if the data from each specific physical sample can be reused on their own in another study, then each should be placed in its own LiPD files.

Signal Level

All the paleo data recording the same environmental signal (i.e. having the same Category:Interpretation_(L)). Again, there are exceptions, such as studies done at the same site by different groups and very different points in time. Follow-up studies where one investigator goes back to the same site to expand the dataset (e.g. longer core/higher resolution sampling) probably warrant a new LiPD file, unless the results don't lead to any science, in which case they might qualifies more as a "replication" study, and be included as a separate data table in the same LiPD file.

Examples:


All data and metadata should be in the same file for the following studies:

  • Lake cores from the same lake
  • Speleothems from the same cave
  • Ice cores from the same hole
  • Marine sediments from the same hole (IODP), same location (multi-core, piston core/gravity cores)
  • Corals from the same head
  • Trees from the same geographical region
  • Lake cores from different lakes but with the same climate interpretation. For instance, a regional composite.
  • Speleothems from different caves with the same climatology

Data and metadata should be in different files for the following studies:

  • Speleothems from different caves in different monsoon regimes
  • Lake cores from different lakes with different catchment basins
  • Marine sediments with different oceanographic regimes
  • Corals from different islands.

On the whole: there are no hard and fast rules, and feedback is welcome.

What constitutes a measurement table?

Simply put, one table per physical sample. So if a study uses two speleothems, the measurements for each sample should be reported in two different tables.

A good rule of thumb is to ask: How is the data going to be reused? For instance, if radiocarbon chronologies for different cores are meant to be independent of each other, then each physical sample should get their own measurement table. On the other hand, if a composite depth is used, then the measurements for each physical sample can be placed in the same table.

Online Lipidifier

The web-based interface can be accessed here. Please not that there are know compatibility issues with Safari.

Instructions

Excel Template

Download the template

Downloading the Excel LiPD Template

Compatible with LiPD version 1.2: File:LiPDv1.2 template.xlsx.

Right-click on the name of the file and select 'Download Linked File'.

Important: Rename the file to be consistent with the DatasetName.


General Instructions

The template has three sheets: Metadata, paleo1measurementTable1, chron1measurementTable1. The sheet named "list" contains ontology information and should not be edited.

There should only be one Metadata sheet/dataset!

If you need additional measurement tables, create new sheets by copying the content from paleo1measurementTable1 to new sheet(s) and name them paleo1measurementTable2, paleo1measurementTable3,... or chron1measurementTable1, chron1measurementTable2,...

Example of a yellow pop-up in the LiPD Excel Template

All the fields in red are mandatory for a LiDP file to be valid. if you're unsure how to answer a question, click on the cell and a yellow pop-up will appear with directions. All the terms used in the Excel template have formal definitions that can be found on this wiki. Use the search bar to access a definition of a term and examples on how the term was used.

Example of a drop-down menu in the LiPD Excel template

Some of the field are drop-down menu options:

  1. You may be required to choose something already on the list (e.g., variableType).
  2. In some instances, you can add your answer if it doesn't have an option (e.g., a new type of proxy observations).

If a dataset only contains inferred variables:

To make the data reusable by the community, we strongly encourage you to enter your raw measurements (Category:MeasuredVariable (L)) along with its interpretation (Category:InferredVariable (L)). However, we are aware that this may not always be possible. For instance, when transforming a legacy dataset into LiPD format, the raw measurements may not be readily available. However, the LinkedEarth wiki (and LiPD) requires a type of archive (e.g. marine sediment). On the wiki, the type of archive is only accessible through a Category:MeasuredVariable (L).

You may wonder why that is. After all, both Category:MeasuredVariable (L) and Category:InferredVariable (L) are a type of Category:Variable (L). However, remember that the LinkedEarth Ontology is designed to describe the relationship among the various categories. A measured variable is measured on the archive while the inferred variable is inferred from a measured variable.

Therefore, one needs to create the measured variable (a dummy one with no values if necessary) on the wiki.

Let's use a practical example. If the dataset you're working with only contains Sea Surface Temperature values and not the associated Sr/Ca data that the temperature inferred from, then create another column filled with the missing value flag for the datasets, using the Sr/Ca header. In the mediate section, only fill out the name, variableType ( measured or inferred), and ProxyObservationType for the variable (in this case, Sr/Ca).

If your table contains more than 14 columns, you can inset the corresponding lines for the metadata. Make sure you copy and paste the formulas from the previous lines! If you have less than 14 variables, clear the content of the cells (In Excel, right click -> Clear contents) but DO NOT delete the rows (i.e. leave them blank). Also clear the unused headers in the table.

Fill in as many fields of the template as possible. Future generations of researchers will thank you!

Step-by-step Instructions

Note: The dataset used for the instructions is a dummy dataset. None of the values were measured.

Remember all the fields in red are mandatory.

Metadata
Example of metadata for a fictional dataset
Scroll-down menu for the archiveType

The Metadata sheet contains the metadata pertaining to the entire dataset.

  • Dataset Name: The standard notation used on the LinkedEarth wiki is siteName.firstAuthor.year.
  • ArchiveType: The type of proxy archive on which the measurements were made. This automatically set the Category:ProxyArchive (L) to the proper type.
  • Original Source_URL: If the data is also stored on NOAA, PANGEA, or with the original publication, enter the URL
  • Investigators: This corresponds to the contributors on the wiki. Enter the name of anyone who has contributed to the creation of the dataset, including the authors on the publication or lab technicians involved in the study.
  • Publication Section:
  • Site Information:
    • Northernmost latitude (decimal degree, South negative): The wiki uses a more sophisticated approach for Category:Location (L). Enter the northernmost latitude of your site in the Excel template first, then make appropriate correction directly on the wiki.
    • Southernmost latitude (decimal degree, South negative)
    • Easternmost longitude (decimal degree, West negative)
    • Westernmost longitude (decimal degree, West negative)
    • elevation (m), below sea level negative
  • Funding Agency:


Measurement Tables
MeasurementTable tab on the Excel template for conversion to the LiPD format highlighting the metadata and data section.

By default, the Excel template contains sheets to enter a measurement table for the paleo information and one for the chron information. As mentioned in the general instructions, you can add as many measurement tables as necessary.

The step-by-step guide below uses the PaleoData information. The table for the chron information is virtually identical.

The Excel sheet is organized in two sections:

  • The top portion is reserved for the metadata associated with each variable
  • The bottom portion contains the data, with appropriate headers.
Data
Example of data entered in the LiPD template. Note the column headers and the missing value flag in this example. Note: Data are not from a real example.

Copy and paste your data starting in column A. The first row corresponds to your column header (variableName). Make the name human-readable and as precise as possible. Don't forget to enter the missing value flag! We recommend using NaN.

Metadata

Each row corresponds to the metadata associated with each of the column in the data table. If your data table contains more than 14 variables, you can insert lines below <variable14>. Make sure you copy and paste the formulas from the previous lines!

  • variableName: The name of the variable. It is automatically lifted from the column headers. THESE NEED TO MATCH. Do not use parenthesis for anything besides units. Use the notes instead.
  • units: If no units (because the quantity is a string or a ratio), write "unitless".
  • variableType: Use the drop-down menu to select either measured or inferred. This is required information to set the proper page category on the wiki (and therefore associated property).
  • units: The units in which the variable is expressed.
  • ProxyObservationType: If the variable is measured, select the type of proxy observation the variable belongs to. The drop-down menu contains the Category:ProxyObservation (L) already in the LinkedEarth Ontology, where you can provide a definition for the new term. If your variable is a new type of observations, enter it in the box. This will automatically create the concept in the LinkedEarth Ontology. Although this property may seem redundant with variableName, think about it from a computer perspective. Let's take the concrete example of a variableName set to G. ruber Mg/Ca. There are actually two pieces information in the name: 1. The ProxyObservationType, which is Mg/Ca in this particular example, and 2. The Category:ProxySensor (L), which is Globigerinoides ruber in this example. A human can make sense of the two pieces of information; this is why we are asking for a variableName in human-readable form. However, the computer needs to place the two pieces of metadata in difference categories.
  • InferredVariableType: If the variable is inferred, select the type of inferred variable (for instance, Sea Surface Temperature). The drop-down menu contains the various types of inferred variables already in the LinkedEarth Ontology. If your variable is a new type of inferred variable, enter it in the box. This will automatically create the concept in the LinkedEarth Ontology, where you can provide a definition for the new term.
  • TakenAtDepth: The wiki links each variable with an appropriate depth column using the Property:TakenAtDepth (L). The drop-down menu will automatically populate with the available variable name. Select the most appropriate column for depth information (if any). If multiple depth are reported, select one in the Excel menu. You can add more on the wiki directly.
  • InferredFrom: This property links the inferred variable to the measured variable from which it has been derived. If the actual values of the measured variable are not provided (for instance, in the case of a legacy dataset), add a dummy column in the DataTable as explained in the general instructions.
  • notes: notes regarding the specific variable. Notes pertaining to the entire measurement table should be entered on the first row of the Excel sheet.
Example of metadata from the interpretation field for variables in a DataTable: name, variableDetail, rank (i.e., importance) of the interpretation, basis of the interpretation, isLocal, the direction of the interpretation, and the scope of the interpretation.

Note: To add an additional interpretation, copy and paste the headers modifying them to Interpretation2_variable, Interpretation2_variableDetail, Interpretation2_rank, Interpretation2_basis, Interpretation2_local, Interpretation2_interpDirection, Interpretation2_scope... Then copy and paste the formulas for the drop-down menus.

Example of metadata from the calibration field for variables in a DataTable: the calibration equation, notes, calibration reference, and the associated uncertainty.
Example of metadata pertaining to the proxy sensor: the genus and the species.
Example of metadata from the physical sample field for variables in a DataTable: name of the physical sample, an alpha-numeric identifier, the IGSN number if available, the location of the sample, the collection method.
  • Physical Sample
    • name: The common name for the physical sample. For instance, "OPD 846".
    • identifier: A particular identifier for the sample. For instance, "CAS A" and "CAS D" were used to identify two speleothem samples from the same cave in the Reuter et al. (2009) [2]
    • hasIGSN: The IGSN number if available
    • housedAt: In which location is the sample currently been curated. Can be the name of a laboratory or a central repository. On the wiki, this will linked to a standard page where information about the laboratory or repository can be entered.
    • collectionMethod: The method used to collect the sample (e.g., piston core, gravity core,...).

The example referenced above can be found here: File:Excel to LiPD Template TestDataset.xlsx.

Note: None of the metadata and data values in this example come from a real dataset.


Converting to LiPD

As of April 2017, the conversion to a LiPD file needs to be done in Python (a free, open-source computing language). Note that only versions >= 3.5 are supported.

Installing the Python LiPD utilities

In a terminal window, type:
 pip install lipd 
For Python 3.6 users, if the pip command fails, use the following:
 pip3 install --egg lipd 

For more information about how to use the utilities, visit the GitHub page.

Running the Python LiPD utilities

Open your favorite Python interface (we recommend the use of Spyder, which comes with the Anaconda Python release) and type

#Import the package
import lipd  
#The following command will trigger a GUI to navigate to the Excel file. If you know the path, you can enter it directly in the parenthesis (using quotes)        
lipd.readExcel()    
#Create your LiPD file
D = lipd.excel()

#Validating your file.
#The following command will validate your file to make sure that it's conformed to the LiPD requirements. If the validation step failed, make sure that all the fields in red have been completed.
lipd.validate(D)

You can also use the online validator to validate your LiPD file!.

References

  1. P Anand, Elderfield, H., Conte, M.H. (2003) Calibration of Mg/Ca thermometry in planktonic foraminifera from a sediment trap time series. Paleoceanography, 18 (2), 1050, doi:10.1029/2002PA000846
  2. Reuter, J,m L. Stott, D. Khider, A. Sinha, H. Cheng, R.L. Edwards (2009). A new perspective on the hydro climate variability in northern South America during the Little Ice Age. Geophysical Research Letters, 36, L21706, doi:10.1029/2009GL041051